Download 2002 Jaguar X-Type V6-2.5L Vehicle Level Maintenance Fluids Fluid – A/T Testing and Inspection. Transmission Fluid Level Check Raise and support the vehicle. 1. Connect the approved Jaguar diagnostic system. 2. Make sure J-Gate shift selector is in the Park position (P). 3. With the engine running and the foot brake applied, move the J-Gate shift selector through “P-R-N-D-4-3-2″ and back to the “P” position to circulate the automatic transmission fluid until the temperature reaches 30 to 40°C (86 to 104°F) on the approved Jaguar diagnostic system. 4. When the automatic transmission fluid temperature reaches 35°C (95°F) check that the selector lever is in the “P. position raise the vehicle. Motor / ALLDATA Online – 2002 Jaguar X-Type V6-2.5L – Testing and… http://www.motoralldata.com/alldata/MOTOR~V71595976~C40438~… 2 of 4 3/28/2008 11:44 AM Zoom Sized for Print If the automatic transmission fluid does not come out of the transmission fluid level tube the automatic transmission fluid level is insufficient.… Read More
What Transmission Fluid Do I Need For 2008 Ford Edge
I was looking at the maintenance schedule and noticed there is no schedule to replace the transmission fluid (ATF). I have to think why Ford does not suggest to.
The engine in your 2008 Ford Edge should be running when you perform a transmission fluid level check, otherwise it will be inaccurate. The video above shows where.
Report; windlake answered about a year ago Hi David, based on my car maintaince schedule, the transmission fluid need to be changed, I will do it just in case..
Filed Under (Ford) by Doe Namblas on 04-02-2014
Download FORD: MERCURY: 2008 Escape 2008 Mariner This article supersedes TSB 08-16-12 to change the OPERATION DESCRIPTION TIME production fix date. 090904A 2008 Escape/Mariner1.1 Hrs. CD4E Transmission: ISSUE Replace The Transmission Some 2008 Escape and Mariner vehicles (excluding Fluid Cooler, Includes Hybrids) built on or before 5/9/2008 and equipped Time To Remove And with a CD4E transmission may exhibit a fluid leak Install Bumper Cover, from the transmission cooler. Evacuate And Charge Air Conditioning System, Top ACTION Off Transmission Fluid (Do Follow the Service Procedure steps to correct the Not Use With 19700A, condition. 19700A7) DEALER CODING SERVICE PROCEDURE CONDITION BASIC PART NO. CODE Replace the transmission / A/C cooler with a new 19712 07 updated part following Workshop Manual (WSM), Section 412-01. PART NUMBER PART NAME 8L8Z-19712-J Transmission / A/C Cooler WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage IMPORTANT: Warranty coverage limits/policies are not altered by a TSB.… Read More
Filed Under (Other Manuals) by Doe Namblas on 01-01-2014
Download Models: 2004-2005 Buick Rainier 2003-2005 Chevrolet TrailBlazer Models 2003-2005 GMC Envoy Models 2003-2004 Oldsmobile Bravada 2005 Saab 9-7X with 4.2L In-Line 6 Cylinder Engine (VIN S — RPO LL8) #05-07-30-031: 4L60-E Automatic Transmission/Torque Converter Clutch (TCC) Shudder, Water in Transmission (Repair Transmission and Replace Transmission Filler Tube, Level Indicator and Seal) – (Nov 11, 2005) Condition Some customers may comment on a shudder condition at approximately 64-80 km/h (40-50 mph) when the TCC engages. Cause This condition may be caused by water in the automatic transmission fluid (ATF). Water may enter the transmission by dripping from the cowl area onto the handle of the transmission fluid level indicator. Indications of water in the ATF may include: • Visible rust on the transmission fluid level indicator. • Visible water in the oil pan. • A milky white substance inside the pan area. • Spacer plate gaskets that appear to be glued to the spacer plate, valve body or case.… Read More
Filed Under (Ford) by Doe Namblas on 18-03-2014
Download “Mobile-ease™” Hands Free System Connector Wiring Harness Required for Installation of “Mobile-ease™” Hands Free System 3W4Z-14A411-AA 2005-2008 Hands Free System Requires Connector Harness 14A411 for Installation3W4Z-19G399-AA2005-2008 Bed Hooks, Retractable Stainless Steel XC3Z-99000A64-AA 2000-2008 Black E-Coat XC3Z-99000A64-BA 2000-2008 Bed Mats Long Bed, Styleside, With Ford Logo F81Z-99112A15-AA 1999-2008 Short Bed, Styleside, With Ford Logo F81Z-99112A15-BA 1999-2008 Bed Rail Caps, Diamond Plate Short Bed, With Stake Pocket Holes F81Z-99291A40-CAA 1999-2008 Long Bed, With Stake Pocket Holes F81Z-99291A40-DAA 1999-2008 Bedliner/Bedmat Tailgate Cover F75Z-99000A38-AA 1999-2008 Bedliners** With Ford Logo For Styleside 8.0′ Bed F81Z-9900038-AA 1999-2008 For Styleside 6.5′ Bed F81Z-9900038-BA 1999-2008 Bug Shield Low Profile Smoke-Color (Single-Pack) 8C3Z-16C900-A 2008 Smoke-Color (Bulk Pack of 10) 8C3Z-16C900-B 2008 Smoke-Color (Bulk Pack of 25) 8C3Z-16C900-C 2008 Mini Chrome-Color (Single-Pack) 8C3Z-16C900-D 2008 Chrome-Color (Bulk Pack of 10) 8C3Z-16C900-E 2008 Chrome-Color (Bulk Pack of 25) 8C3Z-16C900-F 2008. Deflectors, Side Window Crew Cab 4-Piece Set, Smoke-Color (Single-Pack) F81Z-18246-CA 1999-2008 4-Piece Set, Smoke-Color (Bulk Pack of 10) YC3Z-18246-HA 1999-2008 4-Piece Set, Smoke-Color (Bulk Pack of 25) YC3Z-18246-JA 1999-2008 Regular Cab 2-Piece Set, Smoke-Color (Single-Pack) F81Z-18246-AA 1999-2008 2-Piece Set, Smoke-Color (Bulk Pack of 10) YC3Z-18246-BA 1999-2008 2-Piece Set, Smoke-Color (Bulk Pack of 25) YC3Z-18246-CA 1999-2008 Super Cab 4-Piece Set, Smoke-Color (Single-Pack) F81Z-18246-BA 1999-2008 4-Piece Set, Smoke-Color (Bulk Pack of 10) YC3Z-18246-EA 1999-2008 4-Piece Set, Smoke-Color (Bulk Pack of 25) YC3Z-18246-FA 1999-2008 Floor Mats, All Weather Molded Vinyl Front & Rear, 3-Piece Set, Front With Vehicle Logo Super Cab, Ebony 8C3Z-2613300-B 2008 Crew Cab, Ebony 6C3Z-2813300-A 2002-2008 Front Pair, With Vehicle Logo Reg.… Read More
Filed Under (Ford) by Doe Namblas on 06-02-2014
Download REMOVAL Step 1 Before you begin – let vehicle cool for about an hour. Disconnect battery. Raise vehicle and support on jack stands. The higher you raise it, the easier it is to work under. If your installing a new transmission and converter, skip to STEP 3 Step 2 Drain oil from transmission by removing the drain plug. This is a good time to install a TCI® Drain Plug Kit, TCI® #805800. Pans without plug must be slowly removed by freeing one end and allowing bolts on other end to hold pan. The pan will drop down to allow the fluid to run out the end. Use a drain pan to catch fluid. Remove remainder of bolts and slowly lower pan and pour remainder of fluid in drain pan. Replace filter and clean pan and install new pan gasket. (New gaskets and filters available from TCI®). Reinstall pan and torque pan bolts to OEM specs.… Read More
Filed Under (Ford) by Doe Namblas on 02-01-2014
Download 2005 Ford Truck F 150 2WD Pickup V8-5.4L SOHC VIN 5 Vehicle Level Engine, Cooling and Exhaust Engine Technical Service Bulletins All Technical Service Bulletins Ignition System, Spark Plug Removal Instructions. FORD: 2005-2008 Mustang 2004-2008 F-150 2005-2008 Expedition, F-Super Duty 2006-2008 Explorer, F-53 Motorhome Chassis 2007-2008 Explorer Sport Trac LINCOLN: 2005-2008 Navigator 2006-2008 Mark LT MERCURY: 2006-2008 Mountaineer This article supersedes TSB 08-1-9 to update Vehicle Applications, Service Procedure and Part List. ISSUE Some 2004-2008 F-150, 2006-2008 Mark LT, 2005-2008 F-Super Duty, Expedition, and Navigator, with 5.4L 3-V engine; 2005-2008 Mustang, 2006-2008 Explorer, Mountaineer, and 2007-2008 Explorer Sport Trac with 4.6L 3-V engine; 2005-2008 F-Super Duty, 2006-2008 and F-Stripped Chassis, with 6.8L 3-V engine may experience difficulty with spark plug removal. This may cause damage to the spark plug and leave part of the spark plug in the cylinder head. Affected engine build dates are as follows: 5.4L 3-V and 6.8L 3-V before 10/9/07, 4.6L 3-V before 11/30/07.… Read More
Filed Under (Ford) by Doe Namblas on 14-01-2014
REMOVAL: 1) Disconnect the negative battery cable(s). 2) Place the transmission into the Neutral (N) position. 3) Raise the vehicle on a hoist. 4) Mark the drive shaft and pinion yokes for assembly alignment. On 4WD models, remove the skid plate. 5) Remove the transmission oil filter tube nut and filler tube. 6) Position a drain pan & disconnect the transmission fluid cooler tubes at the cooler bypass valve. 7) Remove the drive shaft. On 4WD models, remove the front drive shaft & transfer case assembly. On SuperDuty/Motorhome models, remove the transmission mounted parking brake assembly. 8) NOTE: If the vehicle is equipped with a PTO (Power Take-Off) unit, all or part of the PTO will need to be removed. 9) Disconnect the shift cable from the transmission and manual lever. 10) Disconnect the cable housing from the bracket. 11) Disconnect the digital transmission range (TR) sensor connector. 12) Remove the transmission heat shield.… Read More
Filed Under (Ford) by Doe Namblas on 31-12-2013
Please Note : The following instructions were made to act as a guide/reference, if you are inexperienced with performing an automatic transmission installation it is highly recommended that you contact a certified experienced professional to perform the installation and/or make the proper adjustments for you! Instructions : (1) Pre-installation instructions; Disconnect Battery terminal, inspect and check transmission coolant lines for damage, flush lines and coolant system thoroughly. (2) Inspect crank well for converter hub wear, and clean this area. (3) Check Flywheel for cracks and converter bolt holes for wear. (4) Inspect back of engine block where transmission mates, ensure block is clean, no wires or cables are in the way of installation. (5) Inspect and verify both dowel pins are clean and secure in block. (6) Ensure Block Plate is aligned and straight. (7) Clean area of block so transmission can make a good ground. “Warning” Transmission will suffer permanent damage if grounded improperly!… Read More
Filed Under (Ford) by Doe Namblas on 24-11-2013
Download Parts REQUIRED for the install Description Snap on in dash wire harness ** Please read instructions first Radio dash installation kit 1999 Ford F150/Expedition kit Optional parts for this install None. Remove Factory Radio STEP 1 : The plastic dash panel surrounding the radio must be removed. This dash panel simply unsnaps by pulling. With your hands, grab one corner and pull until the plastic dash panel completely pulls away from the main body of the dash. The Ford radio is snapped into the vehicles dash. With the proper tool, known as Ford radio removal keys, the Ford radio can be pulled forward out of the dash. A clothes hanger can be used instead of actual Ford radio removal keys. Cut the clothes hanger and bend 2 pieces in a ‘U’ shape. For more information on how to remove the radio, see the diagram below. STEP 2 : Pull the radio from the dash.… Read More
Download (1) Pre-installation instructions; Disconnect Battery terminal, inspect and check transmission coolant lines for damage, flush lines and coolant system thoroughly. (2) Inspect crank well for converter hub wear, and clean this area. (3) Check Flywheel for cracks and converter bolt holes for wear. (4) Inspect back of engine block where transmission mates, ensure block is clean, no wires or cables are in the way of installation. (5) Inspect and verify both dowel pins are clean and secure in block. (6) Ensure Block Plate is aligned and straight. (7) Clean area of block so transmission can make a good ground. “Warning” Transmission will suffer permanent damage if grounded improperly! Installation : (1) Transmission Fluid: you need about 10 to 12 quarts of fluid for installation, Dextron III with Mercon, 1968 – 1993 Vehicles and Mercon 5, 1994 and Newer, any brand name. (2) If transmission was purchased with a torque converter from Monster Transmission & Performance, no need to follow step (3).… Read More