2005 Peugeot 307 Digital Music Changer Installation Guide

Download Compatible with: CITROEN C2/C3/C4/C5/C6 & C8 with Blaupunkt/VDO RD4 head unit PEUGEOT with Blaupunkt/VDO RD4 head unit Peugeot 307 (>2005) Peugeot 607 (>2005) Peugeot 807 (>2005) Peugeot 407 (>2005) Peugeot 207 (>2006) Peugeot 308 (>2007) Peugeot 307sw (>2005) Peugeot 407sw (>2005).
Installation Guide: Caution : Before the installation of DMC, you need make sure the cd changer option of Citroen or Peugeot head unit is been set on. Otherwise you need go to dealer to open the cd changer option. 1. Before the installation, power off the car 2. Plug the Digital Music Changer into your car stereo changer port (usually located behind the radio) 3. Insert the USB disk or SD Card (Please consult user manual about setting music files in the USB disk or SD Card) 4. For PC, PSP, MD, Mobile Phone etc aux device, connect it with Aux in port 5. Once the unit is installed, power on the radio, then press the Source button, you will then have the following control: Disk+/Disk-, Next track, Previous track, Fast Forward & Fast Rewind etc.… Read More

Peugeot 207/307 Pioneer 2-DIN 12.301320-00 Installation Guide

Download
Installation manual for VW Golf IV / Bora / Lupo / Passat <-’04 / Polo 9N 01-> / Sharan <-’06 Seat Cordoba / Leon <- ’05 / Toledo <- ’05 Arosa / Alhambra Skoda Fabia <-04 / Octavia <- ’04 / SuperB Citroën C2/ C3 / Ford Galaxy – > 2006 Mercedes A 01 – 04 -> 2004 W168/ M – > 2005 Peugeot 207/ 307/ Renault Laguna II ‘ 02 – > ‘ 05 Volvo V40/ S80 – >2006.
Installation kits includes following items: * 1x 2-ISO metal installation bracket; * 2x Mounting plates for Pioneer head unit; * 1x radio trim for Pioneer head unit; * 2x radio keys for removal of Pioneer head unit; * 4x screws for Mounting plates; * 2x Cushion.
1 Remove storage bin and/off radio. 2 Place 2 ISO bracket. 3 Connect all wiring and place head unit. 4 Connect all of the needed wiring harnesses and check all connections carefully… Read More

PEUGEOT 207 GTI/ R56 MINI COOPER DUMP VALVE INSTALLATION

Download
Tools needed: 7mm hose clamp driver T30 screwdriver Phillips head screwdriver 4mm and 5mm allen key/allen socket 10mm socket.
1. Lift the bonnet and begin by undoing the two jubilee clips holding the hose between the airbox and turbo inlet. Pull off the breather to the cam cover and remove the whole hose assembly from the car. 2. Remove the airbox by undoing the single bolt on the left hand side, then pulling it upwards to remove it from the rubber grommets that hold it to the top of the inlet manifold, giving you access to the cold air feed that simply pulls off the right hand side. 3. Remove the MAP sensor from the top of the inlet manifold as shown, then push it firmly into the supplied Forge MAP sensor boss. A little silicon spray will make it easier. Attach the length of silicon vacuum hose supplied to the vacuum nipple on the side of the boss, then reattach the whole assembly back to the inlet manifold with the brass screw provided.… Read More

Citroen/Peugeot Sony CDX-T69 Part No. PUGS1 Installation Guide

Download
VEHICLE APPLICATIONS This comprehensive interface is compatible with the following vehicle manufacturers: CITROEN This interface is designed for use with the majority of Citroen models from 1998 including C3, C5, Berlingo, Saxo, Xsara & Xsara Picasso. This is compatible with the following standard Citroen head units: Models with Philips/VDO Head Unit: 22RC260/65Z, 22RC220/35Z OR Models with Clarion Head Unit: PU2325A, PU2294C, PU2325B, PU2358A, PU2471A This interface is not designed specifically for use with the Citroen Satellite Navigation system, but in some instances it may work. PEUGEOT This Interface is also designed for use with the majority of Peugeot models ranging from ’98. This is compatible with the following standard Peugeot head units; 106, 306 and 806 models with Philips Head Unit 22RC200/35/65 or Clarion Head Unit PU2294A 206/307 models with Philips/VDO Head Unit 22RC260/65Z, 22RC220/35Z or Clarion Head Unit PU2325A, PU2294C, PU2325B, PU2358A, PU2471A 406 models with Clarion Head Unit PU2184A / PU1633A / PU1646A This interface is not designed specifically for use with the Peugeot Satellite Navigation system, but in some instances it may work.… Read More

2008 Peugeot 308 Parrot RKi8400 Installation Guide

Download
Compatibility Car models Peugeot 207: > 2006 Peugeot 308: > 2007 Peugeot 307: > 2006 Peugeot 407: > 2006.
Installation of the Parrot RKi We recommend you to install the Parrot RKi before installing the UNIKA. Make sure the installation is correctly performed by checking if the «Good bye» message is displayed when you turn off the ignition. ? Refer to the documentation of your Parrot RKi for more information. Selecting the protocol Use the DIP switches located on one side of the UNIKA to select the protocol (resistive or CAN Bus / KBus) on which the vehicle is based. Warning: Make sure the UNIKA is not powered before selecting the protocol. Installing the UNIKA with the Parrot RKi8400. Replace the MKi part on the UNIKA cable by the provided RKi part. Connect the UNIKA between the Parrot RKi8400 and the vehicle wiring. If your vehicle is based on a CAN Bus or KBus protocol, the mode (A, B, C or D) is automatically defined.… Read More

2008 Peugeot 308 Parrot MKi9000/MKi9100/MKi9200 Installation Guide

Download Compatibility Car models Peugeot 207: > 2006 Peugeot 308: > 2007 Peugeot 307: > 2006 Peugeot 407: > 2006. For Parrot MKi9000 / MKi9100 / MKi9200 Parrot UNIKA : PI090020AA.
The power supply for the UNIKA interface is taken from the power cable of the Parrot MKi. It is important to follow the color code of the power cable wires: the red wire of the kit’s cable corresponds to the permanent 12V supply; the orange wire corresponds to the ignition 12V ; the black wire is for ground ; the yellow wire corresponds to the Parrot mute output. Warning : Connect the ignition to the Parrot car kit if the vehicle is based on a resistive or a K-Bus protocol. Don’t connect the ignition if the vehicle is based on a CAN protocol. On some vehicles, the 12V power wires may be reversed, in which case you must reverse the red and orange wires of the hands-free kit’s power supply.… Read More

Peugeot – Auxiliary Input Part No. PUGX1 Installation Guide

Download This Interface is designed for use with the majority of Peugeot models ranging from ’98. This is compatible with the following standard Peugeot head units: 106, 306 and 806 models with Philips Head Unit 22RC200/35/65 or Clarion Head Unit PU2294A 206/307 models with Philips/VDO Head Unit 22RC260/65Z, 22RC220/35Z or Clarion Head Unit PU2325A, PU2294C, PU2325B, PU2358A, PU2471A 406 models with Clarion Head Unit PU2184A / PU1633A / PU1646A This interface is not designed specifically for use with the Peugeot Satellite Navigation system, but in some instances it may work. When connected this interface will allow the audio from an auxiliary input (DVD, MP3 etc) to be played through the vehicles speaker system via the CD mode on the OEM head unit. PRECAUTIONS Vehicles manufactured after 1999 including 206, 307 & 607 may require the head unit initialising by a Peugeot main dealer. INSTALLATION It is important that the installation sequence is followed to ensure complete and proper recognition by the factory head unit.… Read More

2007 Peugeot Expert Clarion 2-DIN BKX-1040-11

Download manual for: Peugeot 207 / 307 2007, Fiat scudo 2007, Peugeot Expert 2007, Citroën Jumpy / C2 / C3 2007.
Installation kit includes the following items: * 1X 2-ISO 110 mm. metal bracket * 1X Radio trim * 2X Mounting plates * 2X Mounting spacers * 2X Radio removal keys * 4X Screws * 2X Cushion.
2-DIN BKX-1040-11 * Mount the plates. Use this hole Use this hole We advice to use the following positions. Other positions are also possible. Use position 2 marked with a cross. Use position 12 & 14 marked with an arrow. Measured from left to right. We advice to use the following positions. Other positions are also possible. Use position 2 marked with a cross. Use position 14 & 16 marked with an arrow Measured from left to right. Remove radio by using the original radio keys. Remove the storage bin. Place the 2-Din metal bracket.… Read More

PEUGEOT 407 e253 CAR ALARM CONTROL UNIT

Download
LOCATION OF THE CAR ALARM CONTROL UNIT Compact control units and sirens: place under the bonnet on the wheel box on the driver’s side. Modular control units and accessories: place under the dashboard on the driver’s side. CAR ALARM SUPPLY Positive: Connect the Can Bus connector in the kit of accessories supplied with the e253 (see instructions for its connection in following pages). Power is taken from the Red wire (Pos. 1). Negative: Connect the Can Bus connector in the kit of accessories supplied with the e253 (see instructions for its connection in following pages). Earth is taken using the Black wire (pos. 2) IMMOBILISER Starter Motor: Cut the White wire (Pos 3) in the Black 3-pin connector under the steering wheel. ODOMETER Connect to pos 26 (Wire N° 6739) in the black 40 way connector (green part) on the BSI control unit or directly to the ABS control unit under the bonnet next to the battery in pos.… Read More

2002 PEUGEOT 406 SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS

Download
ALARM/SIREN POSITION Position the compact alarms and the sirens on the dome of the shock absorber, passenger’s side. CENTRAL UNIT POSITION Position the modular systems and the modules under the dashboard, driver’s side. POWER SUPPLY + 30: connect to the 3 mm2 RED wire located at the entrance of the fuse box. – 31: connect to one of the original ground terminals located on the right of the BSI operating central.. IGNITION WIRE + 15/54: connect to the wire at the position nr. 16 coming out of the 26 way blue connector of the BSI operating central. DIRECTION INDICATORS Connect to the wires at the positions nr. 13 and nr. 14 of the 16 way black connector coming out of the BSI operating central. ELECTRIC WINDOWS Positive control signal Front window, driver’s side: Refer to the diagram nr. 114. Front window, passenger’s side: Cut the 1 mm2 GREY wire located at the position nr.… Read More