The Peugeot307 DVD Navigation Unit is really Powerful, while the installation for Peugeot 307is Easy. Don ‘tbescaredawayby the apperanceand those complex wires. Follow the installation pictures below, you will know it is really”plug and play”. wires. Follow the installation pictures below, you will know it is really”plug and play”. wires. Follow the installation pictures below, you will know it is really”plug and play”. wires. Follow the installation pictures below, you will know it is really”plug and play”. 1. The original car enter tainmenteffect, then re mo vet he button,the re are screw sinside. 2. Remove the fixed screws oft he air-condition board, prize up the gear board. 3. Prize up the console panel aft err emovethescrews,then takeout the con sole pen el. 4. Remove the screws oft he air-con dit ion board, take it out with the CD module. 5. Takeout the plug oft he CD unit,then cut off the support bar of the con sole panel.… Read More
Download Compatible with: CITROEN C2/C3/C4/C5/C6 & C8 with Blaupunkt/VDO RD4 head unit PEUGEOT with Blaupunkt/VDO RD4 head unit Peugeot 307 (>2005) Peugeot 607 (>2005) Peugeot 807 (>2005) Peugeot 407 (>2005) Peugeot 207 (>2006) Peugeot 308 (>2007) Peugeot 307sw (>2005) Peugeot 407sw (>2005).
Installation Guide: Caution : Before the installation of DMC, you need make sure the cd changer option of Citroen or Peugeot head unit is been set on. Otherwise you need go to dealer to open the cd changer option. 1. Before the installation, power off the car 2. Plug the Digital Music Changer into your car stereo changer port (usually located behind the radio) 3. Insert the USB disk or SD Card (Please consult user manual about setting music files in the USB disk or SD Card) 4. For PC, PSP, MD, Mobile Phone etc aux device, connect it with Aux in port 5. Once the unit is installed, power on the radio, then press the Source button, you will then have the following control: Disk+/Disk-, Next track, Previous track, Fast Forward & Fast Rewind etc.… Read More
The vehicle manufacturer’s specifications regarding trailer load and nose weight are decisive for driving. For the max. trailer weight of your car please refer to the owner’s manual or your car homologation documents, the values specified for the towing hitch must not be exceeded. Formula for D-Value: Max. trailerweight (kg) x Max. permissible weight towing vehicle (kg) 9,81 Max. trailerweight (kg) + Max. permissible weight towing vehicle (kg) 1000 The fixing points specified as standard must be observed. National guidelines concerning official approval of accessories must be observed. These installation and operating instructions must be enclosed with the vehicle papers. Bosal cannot be held responsible for any defects in the product caused by fault or by any injudicious use whatever of the user or a person he is liable for. (sect. 185, art. 2 N.B.W.) All our products are controlled upon dispatch with a weight control system. In the case of missing parts we can only accept a request of replacement with the weight control sticker.… Read More
Download This Interface is designed for use with the majority of Peugeot models ranging from ’98. This is compatible with the following standard Peugeot head units: 106, 306 and 806 models with Philips Head Unit 22RC200/35/65 or Clarion Head Unit PU2294A 206/307 models with Philips/VDO Head Unit 22RC260/65Z, 22RC220/35Z or Clarion Head Unit PU2325A, PU2294C, PU2325B, PU2358A, PU2471A 406 models with Clarion Head Unit PU2184A / PU1633A / PU1646A This interface is not designed specifically for use with the Peugeot Satellite Navigation system, but in some instances it may work. When connected this interface will allow the audio from an auxiliary input (DVD, MP3 etc) to be played through the vehicles speaker system via the CD mode on the OEM head unit. PRECAUTIONS Vehicles manufactured after 1999 including 206, 307 & 607 may require the head unit initialising by a Peugeot main dealer. INSTALLATION It is important that the installation sequence is followed to ensure complete and proper recognition by the factory head unit.… Read More
VEHICLE APPLICATIONS This comprehensive interface is compatible with the following vehicle manufacturers: CITROEN This interface is designed for use with the majority of Citroen models from 1998 including C3, C5, Berlingo, Saxo, Xsara & Xsara Picasso. This is compatible with the following standard Citroen head units: Models with Philips/VDO Head Unit: 22RC260/65Z, 22RC220/35Z OR Models with Clarion Head Unit: PU2325A, PU2294C, PU2325B, PU2358A, PU2471A This interface is not designed specifically for use with the Citroen Satellite Navigation system, but in some instances it may work. PEUGEOT This Interface is also designed for use with the majority of Peugeot models ranging from ’98. This is compatible with the following standard Peugeot head units; 106, 306 and 806 models with Philips Head Unit 22RC200/35/65 or Clarion Head Unit PU2294A 206/307 models with Philips/VDO Head Unit 22RC260/65Z, 22RC220/35Z or Clarion Head Unit PU2325A, PU2294C, PU2325B, PU2358A, PU2471A 406 models with Clarion Head Unit PU2184A / PU1633A / PU1646A This interface is not designed specifically for use with the Peugeot Satellite Navigation system, but in some instances it may work.… Read More
Download Compatibility Car models Peugeot 207: > 2006 Peugeot 308: > 2007 Peugeot 307: > 2006 Peugeot 407: > 2006. For Parrot MKi9000 / MKi9100 / MKi9200 Parrot UNIKA : PI090020AA.
The power supply for the UNIKA interface is taken from the power cable of the Parrot MKi. It is important to follow the color code of the power cable wires: the red wire of the kit’s cable corresponds to the permanent 12V supply; the orange wire corresponds to the ignition 12V ; the black wire is for ground ; the yellow wire corresponds to the Parrot mute output. Warning : Connect the ignition to the Parrot car kit if the vehicle is based on a resistive or a K-Bus protocol. Don’t connect the ignition if the vehicle is based on a CAN protocol. On some vehicles, the 12V power wires may be reversed, in which case you must reverse the red and orange wires of the hands-free kit’s power supply.… Read More
Compatibility Car models Peugeot 207: > 2006 Peugeot 308: > 2007 Peugeot 307: > 2006 Peugeot 407: > 2006.
Installation of the Parrot RKi We recommend you to install the Parrot RKi before installing the UNIKA. Make sure the installation is correctly performed by checking if the «Good bye» message is displayed when you turn off the ignition. ? Refer to the documentation of your Parrot RKi for more information. Selecting the protocol Use the DIP switches located on one side of the UNIKA to select the protocol (resistive or CAN Bus / KBus) on which the vehicle is based. Warning: Make sure the UNIKA is not powered before selecting the protocol. Installing the UNIKA with the Parrot RKi8400. Replace the MKi part on the UNIKA cable by the provided RKi part. Connect the UNIKA between the Parrot RKi8400 and the vehicle wiring. If your vehicle is based on a CAN Bus or KBus protocol, the mode (A, B, C or D) is automatically defined.… Read More
Download Models: 2004-2007 Buick Rainier 2008 Buick Enclave 2003-2008 Cadillac Escalade Models 2005-2008 Cadillac CTS, SRX, STS 2006-2008 Cadillac DTS 2003-2008 Chevrolet Avalanche, Silverado, Suburban, Tahoe, TrailBlazer Models 2006-2008 Chevrolet Colorado 2007-2008 Chevrolet Equinox, HHR 2003-2008 GMC Envoy Models, Sierra, Yukon Models 2006-2008 GMC Canyon 2007-2008 GMC Acadia 2007-2008 Pontiac Torrent 2005-2008 HUMMER H2 2006-2008 HUMMER H3 2007-2008 Saturn OUTLOOK 2005-2008 Saab 9-7X This bulletin is being revised to update the models affected list. Please discard Corporate Bulletin Number 07-08-44-016 (Section 08 — Body & Accessories). Condition Some customers may comment on an inoperative display monitor or monitors in the GM Accessories Headrest DVD System. Cause This condition may be caused by a loose connection at the display monitor cable connectors. These connectors are located at the lower rear part of both front seats. Two cables are routed to the display monitor in each seat. Correction Do This Don’t Do This Install display monitor cable connector clamps.… Read More
Download manual for: Peugeot 207 / 307 2007, Fiat scudo 2007, Peugeot Expert 2007, Citroën Jumpy / C2 / C3 2007.
Installation kit includes the following items: * 1X 2-ISO 110 mm. metal bracket * 1X Radio trim * 2X Mounting plates * 2X Mounting spacers * 2X Radio removal keys * 4X Screws * 2X Cushion.
2-DIN BKX-1040-11 * Mount the plates. Use this hole Use this hole We advice to use the following positions. Other positions are also possible. Use position 2 marked with a cross. Use position 12 & 14 marked with an arrow. Measured from left to right. We advice to use the following positions. Other positions are also possible. Use position 2 marked with a cross. Use position 14 & 16 marked with an arrow Measured from left to right. Remove radio by using the original radio keys. Remove the storage bin. Place the 2-Din metal bracket.… Read More
Power In standard form the Peugeot 306 GTi 6 2.0 produces 124 kw at the flywheel, and Powerchip improves the engine power to 142 kw. The extra performance achieved by the Powerchip allows your vehicle to respond much better than stock 306 GTi 6 2.0s. You will notice an effortless push back into the driver’s seat, to give you a much more enjoyable and at times safer driving experience. The Powerchip will tap into your Peugeot’s ‘hidden reserves’, to give you an immediately noticeable improvement from your vehicle – we guarantee it! Torque Torque is a measurement of your engine’s pulling power, and it is torque that pulls you up hills, allowing your engine a more linear and aggressive acceleration curve. With the Powerchip, you notice the increase in torque right throughout the rev range, which gives you far greater flexibility at low engine revolutions. Towing will become less demanding, and you will no longer feel the need to take the engine to the redline in each gear to get the performance you demand… It’s always there for you, when you really need it most!… Read More