Download Compatible with: CITROEN C2/C3/C4/C5/C6 & C8 with Blaupunkt/VDO RD4 head unit PEUGEOT with Blaupunkt/VDO RD4 head unit Peugeot 307 (>2005) Peugeot 607 (>2005) Peugeot 807 (>2005) Peugeot 407 (>2005) Peugeot 207 (>2006) Peugeot 308 (>2007) Peugeot 307sw (>2005) Peugeot 407sw (>2005).
Installation Guide: Caution : Before the installation of DMC, you need make sure the cd changer option of Citroen or Peugeot head unit is been set on. Otherwise you need go to dealer to open the cd changer option. 1. Before the installation, power off the car 2. Plug the Digital Music Changer into your car stereo changer port (usually located behind the radio) 3. Insert the USB disk or SD Card (Please consult user manual about setting music files in the USB disk or SD Card) 4. For PC, PSP, MD, Mobile Phone etc aux device, connect it with Aux in port 5. Once the unit is installed, power on the radio, then press the Source button, you will then have the following control: Disk+/Disk-, Next track, Previous track, Fast Forward & Fast Rewind etc.… Read More
Compatibility Car models Peugeot 207: > 2006 Peugeot 308: > 2007 Peugeot 307: > 2006 Peugeot 407: > 2006.
Installation of the Parrot RKi We recommend you to install the Parrot RKi before installing the UNIKA. Make sure the installation is correctly performed by checking if the «Good bye» message is displayed when you turn off the ignition. ? Refer to the documentation of your Parrot RKi for more information. Selecting the protocol Use the DIP switches located on one side of the UNIKA to select the protocol (resistive or CAN Bus / KBus) on which the vehicle is based. Warning: Make sure the UNIKA is not powered before selecting the protocol. Installing the UNIKA with the Parrot RKi8400. Replace the MKi part on the UNIKA cable by the provided RKi part. Connect the UNIKA between the Parrot RKi8400 and the vehicle wiring. If your vehicle is based on a CAN Bus or KBus protocol, the mode (A, B, C or D) is automatically defined.… Read More
Download Compatibility Car models Peugeot 207: > 2006 Peugeot 308: > 2007 Peugeot 307: > 2006 Peugeot 407: > 2006. For Parrot MKi9000 / MKi9100 / MKi9200 Parrot UNIKA : PI090020AA.
The power supply for the UNIKA interface is taken from the power cable of the Parrot MKi. It is important to follow the color code of the power cable wires: the red wire of the kit’s cable corresponds to the permanent 12V supply; the orange wire corresponds to the ignition 12V ; the black wire is for ground ; the yellow wire corresponds to the Parrot mute output. Warning : Connect the ignition to the Parrot car kit if the vehicle is based on a resistive or a K-Bus protocol. Don’t connect the ignition if the vehicle is based on a CAN protocol. On some vehicles, the 12V power wires may be reversed, in which case you must reverse the red and orange wires of the hands-free kit’s power supply.… Read More
Installation manual for VW Golf IV / Bora / Lupo / Passat <-’04 / Polo 9N 01-> / Sharan <-’06 Seat Cordoba / Leon <- ’05 / Toledo <- ’05 Arosa / Alhambra Skoda Fabia <-04 / Octavia <- ’04 / SuperB Citroën C2/ C3 / Ford Galaxy – > 2006 Mercedes A 01 – 04 -> 2004 W168/ M – > 2005 Peugeot 207/ 307/ Renault Laguna II ‘ 02 – > ‘ 05 Volvo V40/ S80 – >2006.
Installation kits includes following items: * 1x 2-ISO metal installation bracket; * 2x Mounting plates for Pioneer head unit; * 1x radio trim for Pioneer head unit; * 2x radio keys for removal of Pioneer head unit; * 4x screws for Mounting plates; * 2x Cushion.
1 Remove storage bin and/off radio. 2 Place 2 ISO bracket. 3 Connect all wiring and place head unit. 4 Connect all of the needed wiring harnesses and check all connections carefully
The Peugeot307 DVD Navigation Unit is really Powerful, while the installation for Peugeot 307is Easy. Don ‘tbescaredawayby the apperanceand those complex wires. Follow the installation pictures below, you will know it is really”plug and play”. wires. Follow the installation pictures below, you will know it is really”plug and play”. wires. Follow the installation pictures below, you will know it is really”plug and play”. wires. Follow the installation pictures below, you will know it is really”plug and play”. 1. The original car enter tainmenteffect, then re mo vet he button,the re are screw sinside. 2. Remove the fixed screws oft he air-condition board, prize up the gear board. 3. Prize up the console panel aft err emovethescrews,then takeout the con sole pen el. 4. Remove the screws oft he air-con dit ion board, take it out with the CD module. 5. Takeout the plug oft he CD unit,then cut off the support bar of the con sole panel.… Read More
VEHICLE APPLICATIONS This comprehensive interface is compatible with the following vehicle manufacturers: CITROEN This interface is designed for use with the majority of Citroen models from 1998 including C3, C5, Berlingo, Saxo, Xsara & Xsara Picasso. This is compatible with the following standard Citroen head units: Models with Philips/VDO Head Unit: 22RC260/65Z, 22RC220/35Z OR Models with Clarion Head Unit: PU2325A, PU2294C, PU2325B, PU2358A, PU2471A This interface is not designed specifically for use with the Citroen Satellite Navigation system, but in some instances it may work. PEUGEOT This Interface is also designed for use with the majority of Peugeot models ranging from ’98. This is compatible with the following standard Peugeot head units; 106, 306 and 806 models with Philips Head Unit 22RC200/35/65 or Clarion Head Unit PU2294A 206/307 models with Philips/VDO Head Unit 22RC260/65Z, 22RC220/35Z or Clarion Head Unit PU2325A, PU2294C, PU2325B, PU2358A, PU2471A 406 models with Clarion Head Unit PU2184A / PU1633A / PU1646A This interface is not designed specifically for use with the Peugeot Satellite Navigation system, but in some instances it may work.… Read More
Download This Interface is designed for use with the majority of Peugeot models ranging from ’98. This is compatible with the following standard Peugeot head units: 106, 306 and 806 models with Philips Head Unit 22RC200/35/65 or Clarion Head Unit PU2294A 206/307 models with Philips/VDO Head Unit 22RC260/65Z, 22RC220/35Z or Clarion Head Unit PU2325A, PU2294C, PU2325B, PU2358A, PU2471A 406 models with Clarion Head Unit PU2184A / PU1633A / PU1646A This interface is not designed specifically for use with the Peugeot Satellite Navigation system, but in some instances it may work. When connected this interface will allow the audio from an auxiliary input (DVD, MP3 etc) to be played through the vehicles speaker system via the CD mode on the OEM head unit. PRECAUTIONS Vehicles manufactured after 1999 including 206, 307 & 607 may require the head unit initialising by a Peugeot main dealer. INSTALLATION It is important that the installation sequence is followed to ensure complete and proper recognition by the factory head unit.… Read More
Download The original radio installed in the dash from General Motors is really a display unit only. This display unit is connected via wires to the actual radio (in this type of design, the actual radio is also commonly called the “brain”) which is located down in the lower dash, hidden below the glove box in front of the passengers seat. The power and speaker wires needed to install the new replacement radio are also located with this hidden “brain”. But, the new radio will be installed in the center console approximately 2-3 feet away from the hidden radio “brain”. 1) The Install Doctor STRONGLY recommends using a snap on wire harness adapter for this install. Since the location for the replacement radio is 2-3 feet from the hidden brain it will be necessary to add 2-3 feet of wire onto each wire of the snap on wire harness to adjust the difference.… Read More
Download Step#01 Remove contents from trunk. Remove bottom trunk liner. Place in clean area. Step#02 Remove parcel storage shelf to access CD changerharness. This is done by removing two plastic trim fasteners. Note: The single-use retention plastic pin maybreak, have extra ones available to replace it. Step#03 Locate the factoryCD changerharness plug in the cavity. If there is no CD changer, the harness plug would be bare with a protective cover. If it is connected to a CD changer, unplug the factoryCD changerharness from the CD changer plug. Step#04 Connect the PhatBox jumperharness to the factoryCD changerharness. Caution! PhatBox should not be connected when performing this task. Step#05 Run the jumperharness plug forthe PhatBox through the ventilation holes in the top of the trunk storage tray. Pass enough cable through to complete the installation. Loop excess, and zip tie. Step#06 Appendix Ais a template foruse in locating the holes to attach the PhatNoise brackets.… Read More
Installation Part Identification Diagram Please refer to diagramsonthefollowing pagesfor identifying parts and terminology. Installation Front Wishbone Bushes 1. Position one of the new solid bushes, complete with bearing, into the wishbone carrier. Tap it in with a copper hammer. Once you have got itsittingsquare in the wishbone, put the wishbone housingin a vice/pressand windthe bush in until it’s fully seated. It is recommendedyou use some aluminium or wood jaws in the vice to prevent damage to the new bush/bearing. Greasing the bushes before fitting is also a good idea. 2. Now place the spacer bar in the wishbone carrier, soit will sit between the two halves of the front wishbone bush. 3. Now put the remaining bush in, repeating the fitment process as above. 4. Once the bushes are in, when you go to refit the wishbone, you need to fit the washers provided between the subframe housing and the roller bearing in each bush.… Read More