2007 Honda Accord CR-V and Civic Remote Engine Starter FAQ

Download
Model Information Release date for Accord Remote Starter System: September 20, 2007 Release date for CR-V and Civic Remote Starter System: End of September 2007 Technical Questions Q: What does the Honda Remote Engine Starter System do? A: The Honda Remote Engine Starter is a two-way remote system that starts and stops your vehicle’s engine anywhere within a 200-foot range. It’s designed to warm up your vehicle in the winter and cool it down in the summer. Q: How much is the Honda Remote Engine Starter? A: Approximately $499.00 without installation for all applicable Honda models. Check with your Honda dealer for the installation cost. Q: Can I install it myself? A: AHM does not recommend that customers install the Honda Remote Engine Starter due to the complexity of its electrical components. Authorized Honda Technicians are professionally trained to safely install the Remote Engine Starter. Q: Can I have my neighborhood audio shop install the Honda Remote Engine Starter?… Read More

Honda Goldwing 1800cc InstaTrike Manual Installation Instructions

Download
Important Notices y Remove all preload from rear suspension of motorcycle after initial installation of InstaTrike. Readjust preload as needed. y InstaTrike is designed for use on paved surfaces only . Use of InstaTrike on unpaved terrain may void warranty. y Installation of InstaTrike requires your motorcycle to be level. Some motorcycles are not level when on the center stand. Level the motorcycle by placing spacers under the center stand as needed y When installing trailer hitch attach all bolts and brackets loosely. After all bolts and brackets are in place tighten all bolts. y Using the enclosed wooden risers under each InstaTrike wheel may make installation and removal easier particularly if traction kit is installed.
Installation Checklist Review entire installation manual, Remove saddle bags and rear fender cover, Modify rear fender cover, Install receiver hitch and double check all bolts, Remount saddle bags, Assemble InstaTrike hitch cart, Attach InstaTrike to motorcycle via receiver hitch, Attach leanstop brace bolts to receiver hitch, Align InstaTrike wheels, Double check all bolts for tightness, Test ride InstaTrike slowly in an open area to familiarize yourself with handling characteristics.… Read More

556H Honda / Acura Immobilizer Bypass Module Installation Instruction

Download Mode 1 Mode 2 ? Honda Accord 2003-2004 ? Honda Accord 1998-2002 ? Honda CRV 2002-2004 ? Honda CRV 1998-2001 ? Honda Civic 2001-2004 ? Honda Odyssey 1998-2003 ? Honda Element 2003-2004 ? Honda Pilot 2003 ? Acura RSX 2002-2004 ? Acura CL 1998-2003 ? Acura TSX 2004 ? Acura Integra 2000-2002 ? Acura TL 2004 ? Acura MDX 2001-2002 ? Acura MDX 2003 ? Acura TL 1998-2002 ? Acura 1.7EL 2001-2004 ? Acura 1.6EL 1998-2000. 1. Remove steering column shroud to gain access to the wire harnesses at the rear of the ignition switch. 2. Locate the appropriate wires exiting the ignition switch and immobilizer receiver. The wire colors are listed in the Wire Color Guide. 3. Wire the 556H as shown in the wiring diagram. GROUND BLACK (+) 12V BATTERYRED IGNITION IN PINK IGNITION OUT PINK/BLACK DATA YELLOW/BLACK DATA YELLOW N.C. ORANGE DATA 2 IN ORANGE/BLACK (-)GROUND IN BLUE/WHITE REFERENCE GREEN ?… Read More

HONDA VTX 1800 Thunder Air Filter Kit Installation Manual

Download
HONDA FI 1800 ADAPTOR QTY PARTS LIST 1 1800 ADAPTOR 1 1/8 VACCUM PLUG 1 3/8″ L BARB 1 3/8″ RED PLUG 4 M5-. 8 X 12 SOCKET HD CAP SCREW 2 M6-1 X 16 FLAT SOCKET HD CAP SCREW 1 BLOCK OFF PLATE 1 1/8″ RED PIPE LUG 1 INSTALLATION INSTRUCTIONS.
1) Remove Seat 2) Remove tank dash. Must remove gas cap first. 3) Remove bolt-holding tank down. 4) Remove air cleaner cover and filter. 5) Remove 4 bolts in black plastic air box. 6) Lift tank and pull air box down and out. 7) Pull hoses off back and unscrew electrical probe 8) Place the 3/8″ red plug into large hose. 9 ) Hose from brass canister replace with 1/8″ vacuum plug. 10) 3/8 hose under throttle body will attach to 3/8 L-barb in new backing plate. 11) Attach electrical probe to new backing plate with screws provided.… Read More

Honda / Acura SIRIUS Interface HON-SC1 INSTALLATION INSTRUCTIONS

Download Compatibility The HON-SC1 is designed to be compatible with select Honda/Acura vehicles. Please consult table for compatibility listing. Compatible Headunit Types: • CD only Headunits* • CD + Cassette Headunits* • 6-CD changer Headunits* • Touch Screen Monitor Headunits • Non-Touch Screen Monitor Headunits * Note: Radio must have a “SAT” or “XM” button to access SIRIUS audio modes. In addition, the HON-SC1 is compatible with most additional factory audio accessories that might be included, such as: • Rear Seat Audio Control Center • Rear Seat Entertainment (DVD/Monitor) System • Heads up display (HUD) • Steering wheel controls Note: Kit not recommended for vehicles with Technology Package (Please see Acura’s website for details). The HON-SC1 is not compatible with the factory satellite radio antenna that might be installed in the vehicle. For best operation you must install a SIRIUS compatible antenna as supplied with the compatible SIRIUS Satellite Radio tuner.… Read More

Honda Goldwing 1100cc InstaTrike Manual Installation Instructions

Download
Important Notices y Remove all preload from rear suspension of motorcycle after initial installation of InstaTrike. Readjust preload as needed. y InstaTrike is designed for use on paved surfaces only . Use of InstaTrike on unpaved terrain may void warranty. y Installation of InstaTrike requires your motorcycle to be level. Some motorcycles are not level when on the center stand. Level the motorcycle by placing spacers under the center stand as needed y When installing trailer hitch attach all bolts and brackets loosely. After all bolts and brackets are in place tighten all bolts. y Using the enclosed wooden risers under each InstaTrike wheel may make installation and removal easier particularly if traction kit is installed.
Installation Checklist Review entire installation manual, Remove saddle bags and rear fender cover, Install receiver hitch and double check all bolts, Remount saddle bags, Assemble InstaTrike hitch cart, Attach InstaTrike to motorcycle via receiver hitch, Attach leanstop brace bolts to receiver hitch, Align InstaTrike wheels, Double check all bolts for tightness, Test ride InstaTrike slowly in an open area to familiarize yourself with handling characteristics.… Read More

Honda Goldwing 1500cc InstaTrike Manual Installation Instructions

Download
Important Notices y Remove all preload (air) from rear suspension of motorcycle after initial installation of InstaTrike. Readjust preload as desired. y InstaTrike is designed for use on paved surfaces only . Use of InstaTrike on unpaved terrain may void warranty. y Installation of InstaTrike requires your motorcycle to be level. Some motorcycles are not level when on the center stand. Level the motorcycle by placing spacers under the center stand as needed y When installing trailer hitch attach all bolts and brackets loosely. After all bolts and brackets are in place tighten all bolts. y Using the enclosed wooden risers under each InstaTrike wheel may make installation and removal easier particularly if traction kit is installed.
Installation Checklist : Review entire installation manual, Loosen saddle bags and remove rear fender cover, Modify rear fender cover, Install receiver hitch and double check all bolts, Remount rear fender and tighten saddle bags, Assemble InstaTrike hitch cart, Attach InstaTrike to motorcycle via receiver hitch, Attach leanstop brace bolts to receiver hitch, Align InstaTrike wheels, Double check all bolts for tightness, Test ride InstaTrike slowly in an open area to familiarize yourself with handling characteristics.… Read More

Honda VTX 1800 Big Air Kit (BAK) Installation Instructions

Download INCLUDED IN THE KIT: (1) BAK Cover (1) Re-usable Performance Air Filter (1) Filter Raincoat (1) Mounting Post (4) M5x40 Stainless Cap Screws (2) M5x10 Stainless Cap Screws (1) Baron VTX 1800 BAK Backing Plate (1) Baron Backing Plate Adapter (2) 1/4-28 x 1 13/16″ Zinc Hex Bolts (2) 1/4″ Lock Washers (2) Aluminum Filter Spacers (3) M6x16 Hex Flange Bolts (3) External Tooth Washers (1) Reed Valve Block Off Kit BA-2561-00 (1) 3/8″ Nylon Nipple Pre-installed (1) 1/2″ Nylon Nipple Pre-installed TOOLS REQUIRED: Factory Service Manual 3, 4 & 5 mm Allen Wrenches 10, 12 & 14mm Sockets 12 & 14mm Wrenches INSTRUCTIONS: 1. Remove fuel tank per Honda service manual instructions. 2. Remove air filter box by taking out air filter element and the 4 screws around air funnels. 3. Disconnect electrical fitting from the IAT sensor (intake air temp sensor). 4. Disconnect two hoses on back of air box.… Read More

555H Honda/Acura Immobilizer Bypass Module

Download Models Honda Accord: 1999-2002 Honda Odyssey: 1999-2002 Honda Prelude 1999 Acura CL 2001-2002 Acura Integra: 2001-2002 Acura MDX: 2001-2002 Acura TL: 2001-2002. Installation Instructions 1. Remove steering column shroud to gain access to the wire harnesses at the rear of the ignition switch. 2. Locate the appropriate wires exiting the ignition switch and immobilizer receiver. The wire colors are listed in the Wire Color Guide . 3. Wire the 555H as shown in the wiring diagram. Wire Color Guide SYNCH BLUE, ORANGE/BLUE, or BLUE/WHITE DATA RED OR BLUE/GREEN KEY SENSE BLUE/WHITE. Wire Connection Guide BLUE/WHITE: Connect this wire to the (-) key sense wire at the ignition cylinder. The key sense wire rests at ground when the key is inserted into the ignition switch. BLACK: Connect this wire to a quality chassis ground (preferably scraped sheet metal) separate from other component ground locations. BLUE: Connect this wire to the BLUE status output of the remote start.… Read More

Honda VTX 1800 Motorcycles Trike Conversion Installation Instruction

Download Removal of Original Parts Secure and raise the motorcycle 9 to 10 inches using a quality motorcycle lift. Remove the following from the vehicle. See OEM manual for detailed instructions. Items to be retained for reinstallation after modification are noted. · Rider’s Seat (to be re-installed without modification) . · Passenger Seat and mounts (to be reinstalled without modification) . NOTE: OEM front and rear seat mounting bolts to be retained and reused. · Left and right passenger foot rests and mounts (to be reinstalled with modification) . · Mufflers (to be re-installed and relocated with minor modification) . · Rear Fender (complete w/ sub frame and all attaching parts) . · Swing Arm, Drive Shaft and Rear Wheel (complete w/ brake line and all attaching parts) Installation of Champion Trike Conversion Kit 3.1 Modify Frame and Passenger Footrests. a. Use 17/64″ drill and drill through frame from inside out using passenger footrest mount holes as guide.… Read More