evaporative emission control system for 1998 sunfire

Your search result for article about " evaporative emission control system for 1998 sunfire". Please use another keyword if these document aren't what you look for.

DTC P0442 Evaporative Emission (EVAP) System Small Leak Detected

Filed Under (Other Manuals) by admin on 17-01-2014

Download DTC P0442 Evaporative Emission (EVAP) System Small Leak Detected Refer to Engine Controls Routing Diagram, EVAP Control System Overview . System Description This DTC tests the evaporative emission (EVAP) system for a small leak. The control module monitors the fuel tank pressure (FTP) sensor signal to determine the vacuum decay rate. At an appropriate time, the control module turns the EVAP canister purge valve ON and the EVAP vent valve ON. This allows the engine to draw a vacuum on the EVAP system. At a calibrated time, or vacuum level, the control module turns the EVAP canister purge valve OFF, sealing the system, and monitors the FTP sensor input in order to determine the EVAP system vacuum decay. If the control module detects a leak larger than a calibrated amount, this DTC sets. The following table illustrates the relationship between the ON and OFF states, and the Open or Closed states of the EVAP canister purge and vent valves.… Read More

  Download DTC P0442 Evaporative Emission (EVAP) System Small Leak Detected

1995 Pontiac Sunfire Engine Control Module

Filed Under (Pontiac) by admin on 09-12-2013

Download Module: All Technical Service Bulletins Recall – Corrosion/Moisture Entering the PCM Product Emission 99090 – PCM Corrosion/Moisture Intrusion #99090 99090–PCM Corrosion/Moisture Intrusion (Install Protective PCM Shield/Cover Assembly) Certain 1997, 1998 and 1999 Chevrolet Cavaliers and Pontiac Sun fires Located in Fifteen U. S. High Road Salt Corrosion States (CT, IL, IN, MA, ME, MN, NH, NJ, NY, OH, PA, RI, VT, and WI) and in Ontario, Quebec and Atlantic Provinces, and Certain 1995, 1996, 1997, 1998 and 1999 Chevrolet Cavaliers and Pontiac Sunfires located in Manitoba, Saskatchewan, Alberta, British Columbia, the Yukon and Northwest Territories. Condition General Motors has decided to conduct a Voluntary Emission Campaign involving certain 1997, 1998 and 1999 Chevrolet Cavalier and Pontiac Sun fire model vehicles located in fifteen U. S. high salt corrosion states and in Ontario. Quebec and Atlantic provinces; and certain 1995, 1996, 1997, 1998, and 1999 Chevrolet Cavalier and Pontiac Sunfire model vehicles located Manitoba, Saskatchewan, Alberta, British Columbia, the Yukon and Northwest Territories.… Read More

  Download 1995 Pontiac Sunfire Engine Control Module

PEUGEOT 407 e253 CAR ALARM CONTROL UNIT

Filed Under (Peugeot) by admin on 01-01-2014

Download
LOCATION OF THE CAR ALARM CONTROL UNIT Compact control units and sirens: place under the bonnet on the wheel box on the driver’s side. Modular control units and accessories: place under the dashboard on the driver’s side. CAR ALARM SUPPLY Positive: Connect the Can Bus connector in the kit of accessories supplied with the e253 (see instructions for its connection in following pages). Power is taken from the Red wire (Pos. 1). Negative: Connect the Can Bus connector in the kit of accessories supplied with the e253 (see instructions for its connection in following pages). Earth is taken using the Black wire (pos. 2) IMMOBILISER Starter Motor: Cut the White wire (Pos 3) in the Black 3-pin connector under the steering wheel. ODOMETER Connect to pos 26 (Wire N° 6739) in the black 40 way connector (green part) on the BSI control unit or directly to the ABS control unit under the bonnet next to the battery in pos.… Read More

  Download PEUGEOT 407 e253 CAR ALARM CONTROL UNIT

2004 Chevrolet Chevy K Silverado Evaporative Emission (EVAP) Canister Vent Solenoid Valve Replacement Pickup

Filed Under (Chevrolet (Chevy)) by admin on 31-12-2013

Download Removal Procedure Important Clean the evaporative emission (EVAP) connections and surrounding areas prior to disconnecting the fittings in order to avoid possible system contamination. 1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information. 2. Remove the harness clip from the canister vent solenoid (CVS) line. 3. Disconnect the CVS electrical connector. 4. If the vehicle is equipped with a 6 ft box, disconnect the EVAP CVS line from the canister. 5. Remove the CVS clip from the frame crossmember. 6. Push in the retainer and remove the CVS from the fuel tank clip. 7. If the vehicle is equipped with a 8 ft box, disconnect the EVAP CVS line from the canister. 8. Remove the CVS clip from the frame crossmember. 9. Push in the retainer and remove the CVS from the fuel tank clip. Installation Procedure 1. If the vehicle is equipped with a 8 ft box, install the CVS to the fuel tank until the clip engages.… Read More

  Download 2004 Chevrolet Chevy K Silverado Evaporative Emission (EVAP) Canister Vent Solenoid Valve Replacement Pickup

Evaporative Emission (EVAP) Vent Valve Replacement

Filed Under (Other Manuals) by admin on 01-01-2014

Download 1. Turn OFF the ignition. 2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information. 3. Disconnect the electrical connector. 4. Remove the EVAP vent valve bracket bolt. 5. Remove the EVAP vent valve from the bracket. 6. Disconnect the vent hose from the EVAP vent valve. 7. Remove the EVAP vent valve. Installation Procedure 1. Install the EVAP vent valve on bracket. 2. Connect the vent hose. Canister vent hose should be routed below the fuel tank fill and vent hoses. Notice Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener.… Read More

  Download Evaporative Emission (EVAP) Vent Valve Replacement

1998 – 2001 Ford Explorer 4WD Ford Ranger Explorer Sport Trac / Edge Mountaineer 4WD Torsion bar key front leveling kit

Filed Under (Ford) by admin on 15-02-2014

Download Part # 22907 1998 – 2001 Ford Explorer 4WD 1998 – 2007 Ford Ranger / Explorer Sport Trac Edge / Mountaineer 4WD Torsion bar key front leveling kit Part# Description Qty. 22907-01 Torsion bar keys 2 22907INST Instruction manual (customer copy) 1 22907INST Instruction manual (installer copy) 1 WARNINGDECAL Warning decal 1 MIRRORHANGER Rear view mirror hanger 1. Important customer information: Tuff Country EZ-Ride Suspension highly recommends that a qualified and/or certified mechanic performs this installation. If you desire to return your vehicle to stock, it is the customers responsibility to save all stock hardware. This vehicles reaction and handling characteristics may differ from standard cars and/or trucks. Modifications to improve and/or enhance off road performance may raise the intended center of gravity. Extreme caution must be utilized when encountering driving conditions which may cause vehicle imbalance or loss of control. DRIVE SAFELY! Avoid abrupt maneuvers, such as sudden sharp turns which could cause a roll over, resulting in serious injury or death.… Read More

  Download 1998 – 2001 Ford Explorer 4WD Ford Ranger Explorer Sport Trac / Edge Mountaineer 4WD Torsion bar key front leveling kit

1998 Ford Ranger Workshop Manual

Filed Under (Ford) by admin on 03-12-2013

Download Engine Special Tool(s) Heavy Duty Floor Crane 014-00071 or equivalent Engine Stand 014-00232 or equivalent 1. Relieve the fuel pressure. For additional information, refer to Section 310-00 . 2. Disconnect the battery ground cable (14301). For additional information, refer to Section 414-01 . 3. Drain the engine cooling system. For additional information, refer to Section 303-03 . 4. Remove the hood (16612). 5. Remove the air cleaner outlet tube (9B659). For additional information, refer to Section 303-12 . 6. Remove the accelerator control splash shield (9E766). 7. Remove the upper radiator hose (8260). 8. Remove the lower radiator hose (8286). 9. Remove the two bolts and position the fan shroud (8146) on the fan blade (8600). 10. Remove the water pump pulley, fan and shroud; refer to Section 303-03 . 11. Disconnect the radiator overflow tube. 2. On vehicles equipped with automatic transmissions, disconnect the transmission cooler lines. 13. Disconnect the mass air flow sensor.… Read More

  Download 1998 Ford Ranger Workshop Manual

1998 FORD Ranger 4.0L OHV UPPER ENGINE GASKETS REPLACING INSTRUCTIONS

Filed Under (Ford) by admin on 31-12-2013

Download Ford 4.0L (OHV) Upper Intake Manifold Assembly Removal & Installation Removal 1. Disconnect the battery ground cable. 2. I highly recommend taking the hood off. Mark where the bolts connect on the hood to ensure proper alignment upon re-installation. My trick was to use “white-out” to do this, comes with a nice little brush. 3. Remove the air cleaner outlet tube by loosening the clamp next to the MAF and the clamp next to the Throttle Body. 4. Disconnect the accelerator cable from the throttle body arm, and then unclip the accelerator cable from the speed control actuator cable. Move them out of the way. 5. Disconnect the vacuum hoses from the brake vacuum booster, EGR valve and crankcase ventilation hose. 6. Disconnect the wiring harness connectors from the EGR valve, the DPFE sensor, and the idle air control (IAC) valve. 7. Disconnect the DPFE sensor hoses. 8. Disconnect the throttle position sensor (TPS) harness connector.… Read More

  Download 1998 FORD Ranger 4.0L OHV UPPER ENGINE GASKETS REPLACING INSTRUCTIONS

2000 Honda Accord EX Coupe Repair Instructions

Filed Under (Other Manuals) by admin on 27-02-2014

Download Applies To: 1998-00 Accord L4 – See VEHICLES AFFECTED MIL Comes On With DTCs P0171 and/or P0172 (Supersedes 00-018, dated March 14, 2000) SYMPTOM The MIL (Malfunction Indicator Lamp) comes on with DTCs P0171 (Fuel System Too Lean) and/or P0172 (Fuel System Too Rich) stored in the ECM/PCM . PROBABLE CAUSE Moisture in the fuel pressure regulator. VEHICLES AFFECTED 1998-99 2-door: ALL 1998-99 4-door: ALL 2000 2-door:From VIN 1HGCG3. . .YA000001 thru YA000919 2000 4-door:From VIN 1HGCG6. . .YA000001 thru YA002332 From VIN 1HGCG5. . .YA000001 thru YA012613 From VIN JHMCG5. . .YC000001 thru YC000015 VIN JHMCG6. . .YC000001 CORRECTIVE ACTION Replace the fuel pressure regulator, and reroute the fuel pressure regulator vacuum line. PARTS INFORMATION Fuel Pressure Regulator (All):P/N 16740-PAA-A01, H/C 5429048 Fuel Pressure Regulator Tube Kit A (M/T with cruise control):P/N 06168-PAA-A10, H/C 6383186 Fuel Pressure Regulator Tube Kit B (A/T with cruise control):P/N 06168-PAA-A60, H/C 6383160 Fuel Pressure Regulator Tube Kit C (M/T without cruise control):P/N 06168-PAB- A00, H/C 6383194 Fuel Pressure Regulator Tube Kit D (A/T without cruise control):P/N 06168-PAB- A50, H/C 6383178 REPAIR PROCEDURE 1.… Read More

  Download 2000 Honda Accord EX Coupe Repair Instructions

Test Guidelines for Use of Essential Tool J 41413-200 Evaporative System Tester

Filed Under (Other Manuals) by admin on 08-04-2014

Download Models: 2002 and Prior Passenger Cars and Light Duty Trucks with Non-Enhanced and Enhanced EVAP Systems. Non-Enhanced EVAP System Diagnostic Procedure 1. Pinch off or plug the EVAP vapor line to seal the EVAP system. 2. Connect the EEST red battery clip to the positive (+) battery terminal. Connect the black battery clip to chassis ground. 3. Install the appropriate fuel fill cap adapter to the fuel fill pipe. Refer to the Service Information for the appropriate fuel fill cap adapter part number. 4. Connect the EEST’s nitrogen/smoke supply hose and vehicle fuel fill cap to the adapter. 5. Turn the nitrogen/smoke valve on the EEST control panel to SMOKE. 6. Use the remote switch to introduce smoke into the EVAP system for 60 seconds. Important: Additional smoke may need to be introduced at 15-second intervals until the leak source has been located. 7. Inspect the entire EVAP system for exiting smoke using the high intensity white light (J 41413-SPT).… Read More

  Download Test Guidelines for Use of Essential Tool J 41413-200 Evaporative System Tester

You might also likeclose