donde esta ubicado elsensor cam camshaft positionde nissan patfiner2000

You search Auto repair manual PDF about donde esta ubicado elsensor cam camshaft positionde nissan patfiner2000, search results will appear below. If search results do not exist, please search by others keyword.

1997 Buick Riviera Camshaft Position (CMP) Sensor Performance

Filed Under (Buick) by admin on 28-03-2014

Download 1997 Buick Riviera | Aurora, Riviera (VIN G) Service Manual DTC P0341 Camshaft Position (CMP) Sensor Performance. Circuit Description The camshaft position PCM input is produced by the ignition control module. The ICM produces the camshaft position PCM input by filtering the camshaft position (CMP) sensor pulses when the engine is running and CKP sync pulses are also being received. The PCM uses the camshaft position PCM input pulses to initiate sequential fuel injection and to determine crankshaft position for the misfire diagnostic. The PCM constantly monitors the number of pulses on the camshaft position PCM input circuit and compares the number of camshaft position PCM input pulses to the number of 18X reference pulses and the number of 3X reference pulses being received. If the PCM receives an incorrect number of pulses on the camshaft position PCM input circuit, DTC P0341 will set and the PCM will initiate injector sequence without the camshaft position PCM input with a one in six chance that injector sequence is correct.… Read More

429-460 Ford V8 ACCU-DRIVE CAM GEAR DRIVE SYSTEM INSTALLATION INSTRUCTIONS

Filed Under (Ford) by admin on 22-12-2013

Download POWER PACKAGE: Edelbrock Accu-Drive gear drives are part of a Total Power Package parts system that can be completed with the use of dyno- matched Performer , Performer RPM, or Torker II cams, intake manifolds, and carburetors. For competition applications, use Edelbrock Victor intake manifolds. Please refer to the Power Package Guide in the Edelbrock catalog to select all the components you need.  ACCU-DRIVE OPERATING PRINCIPAL The Accu-Drive system utilizes a free floating idler gear that is self-aligning and connects the crankshaft and camshaft gears into proper mesh. The large floating idler gear is positioned on the right side of the engine (passenger side). During normal operation, the drive power is transmitted from the crankshaft through the large floating idler to the camshaft gear. During the running operation, there is no backlash between these gears. The small idler gear (located opposite the large idler gear) is also free floating.… Read More

Ford COMP Cams Timing Set Installation Instructions

Filed Under (Ford) by admin on 28-01-2014

Download
Engine Application Ford V6, 144-200; Ford V6, 171 (2600-2800cc); Ford V8, 255, 289, 302 & Boss 302, 1965-1988; Ford V8, 289-351W & Boss 302, pre 1972; Ford V8, 302-351W, 1972 & up; Ford V8, 352-428, 1964-1974; Ford V8, 351C, 351M, 400M, 1970-1982; Ford V8, 429-460, 1968-1971; Ford V8, 429-460, 1972-1987; Ford V8, 429-460 w/nine keyway crank gear; Ford V8, 351W, 351W H.O., 1969-¹84; Ford V8, 5.0L 302 H.O., 1980-March 21, 1984; Ford V8, 5.0L 302, 351W, March 22, 1984-1992.
Tools and supplies needed: 1. Basic hand tools as required for your particular camshaft and balancer bolts 2. Torque wrench 3. Pro Cam Lube (part #153 or #154) or suitable replacement 4. Camshaft Degree Kit (part #4796 including degree video) 5. Crankshaft Socket (part #4798 for Ford 302-351W, 429-460) 6. Thread locking compound 7. Engine repair manual for your particular engine.
The following instructions begin after the timing cover and old timing set have been removed.… Read More

Engine Oil Leak On 1989-1991 Honda 1.5 & 1.6L Engines Repair Instructions

Filed Under (Honda) by admin on 13-02-2014

Download The AERATechnical Committee offers the following information regarding an engine oil leak on 1989-91 Honda 1.5 & 1.6Lengines. Some vehicles that were produced during the mentioned years may have an oil leak around the spark plug well. The spark plug area of the camshaft holder casting could be porous and may leak. If normal diagnosis and repairs do not fix the above-mentioned concern, installation of a new cam holder kit, Part #041 01-PM3-308, H/C: 3046497, will be required. To properly install the new kit, removal of the spark plugs and valve cover need to be done. Upon removal of the valve cover, inspect valve cover rubber seals. If any signs of damage have occurred, replace rubber seals as needed. Turn the engine to TDC, remove the timing belt adjuster and remove the timing belt and rocker arm assembly. Check clearance between the new camshaft holders and the camshaft by coating the new cam holder with oil and installing them without the rocker arms and shafts.… Read More

1995 Nissan-Datsun 200SX Engine-Timing Chain/Front Cover Revised Procedure

Filed Under (Nissan) by admin on 15-02-2014

Download 1991-94 Sentra (B13) w/GA16DE 1991-93 NX1600 (B13) 1995-99 Sentra (B14) w/GA16DE 1995-98 200SX (B14) w/GA16DE SERVICE INFORMATION A revised service procedure for the engine front cover/timing chain has been adopted for the GA16DE. It is no longer recommended to remove the cylinder head when removing the timing chain/front cover(s). Utilize the following steps when servicing the front cover, timing chain, guides or tensioner(s) PARTS INFORMATION CLAIMS INFORMATION Please reference the “Revision C” pages of the Nissan “1992-1999 Warranty Flat Rate Information Manual”, Section “AG”, Op Codes AG12AA, AG14AA, AG142A, AG143A, AG144A and AG24AA. Also reference Section “CA”, Op Codes CA20AA and CA22AA. You will note that the descriptions and flat rate times applicable to the B13 and B14 vehicles (with GA16DE engines) for these Op Codes have been revised to reflect this new procedure. Caution ^After removing the timing chain, do not turn the crankshaft and camshaft separately or the valves will strike the piston heads.… Read More

2009 Ford Escape INTERMITTENT CYLINDER HEAD CAMSHAFT KNOCK/THUMP NOISE

Filed Under (Ford) by admin on 16-03-2014

Download FORD: MERCURY: 2009 Escape 2009 Mariner This article supersedes TSB 09-11-6 to update the b. Isolate noise to LH – Listen to the cylinders Service Procedure and Part List. 4 and 6 valve cover fasteners (number 6 is by the coolant pump). There will be a ISSUE significant difference in transmitted noise Some 2009 Escape and Mariner vehicles, equipped between the cylinder 4 and 6 fasteners with 3.0L engine, may exhibit an intermittent when noise is present. Noise from LH – go knocking or thumping type noise from the cylinder to Step 4. head. After engine temperature reaches 210-220 °F NOTE (99-104 °C), the noise is typically heard from the THE RH AND LH NOISES HAVE DIFFERENT rear of the engine as the vehicle comes to a stop. CAUSES. FOLLOW ALL STEPS CAREFULLY FOR An example would be coming to a stop at the end PROPER DIAGNOSIS AND REPAIR. of a highway exit ramp.… Read More

COMP Cams® Ford Timing Set Installation Instructions

Filed Under (Ford) by admin on 09-12-2013

Download Ford Timing Set Installation Instructions Thank you for choosing COMP Cams® products! We know you have options in valve train component selection and we are proud to be your manufacturer of choice. Please read this instruction sheet carefully before beginning installation, and also take a moment to review the included limited warranty information. Engine Application High Energy Magnum Hi-Tech Ford V6, 144-200 3223 Ford V6, 171 (2600-2800cc) 3236 Ford V8, 255, 289, 302 & Boss 302, 1965-1988 2120 3120 Ford V8, 289-351W & Boss 302, pre 1972 3220 Ford V8, 302-351W, 1972 & up 3230 Ford V8, 352-428, 1964-1974 3208 2108 3108 Ford V8, 351C, 351M, 400M, 1970-1982 3221 2121 3121 Ford V8, 429-460, 1968-1971 3222 2122 3122 Ford V8, 429-460, 1972-1987 2130 3130 Ford V8, 429-460 w/nine keyway crank gear 2134* Ford V8, 351W, 351W H.O., 1969-¹84 2135 3135 Ford V8, 5.0L 302 H.O., 1980-March 21, 1984 2131 3131 Ford V8, 5.0L 302, 351W, March 22, 1984-1992 2138 3138 Notes: * #2120 or #3120 should not be installed on 351W engines as they are designed for 255, 289, 302 or Boss 302 engines.… Read More

2001 Audi A6 Quattro Sedan Timing Belt: Service and Repair Toothed Belt, Removing and Installing

Filed Under (Audi) by admin on 03-01-2014

Download Special tools and equipment: -Spring pin from 2024A -Pin wrench 3212 -Open end wrench 3312 -Wrench 3078 (22 mm) -Clamping bolt 3242 -Camshaft bar T40005 -Puller T40001 -Torque wrench VAG 1410 -Socket attachment VAS 5122 -Tensioning roller key T40009 -Pin T40011 Removing -Remove engine cover-arrows-. -Remove cylinder head cover-1- and -2-. -Disengage spring clips at toothed belt cover. -Remove toothed belt cover. -Remove noise insulation -arrows-. -Removing and installing ribbed belt. See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair -Remove ribbed belt pulley for viscous fan. -Turn crankshaft to TDC by hand. Markings -A- and -B- must be aligned. -Check position of camshafts: larger holes -arrow- in securing plates on camshaft sprockets must be in line with each other and facing inward. If not, turn crankshaft one revolution. -Remove sealing plug -arrow- from left side of cylinder block. -TDC drilling in crankshaft must be behind sealing plug hole (feel to check).… Read More

NISSAN MAXIMA / ALTIMA / QUEST; BUZZING / WHINING NOISE FROM TIMING CHAIN AREA

Filed Under (Nissan) by admin on 02-01-2014

Download 2004-2008 Maxima (A34) 2004-2006 Altima (L31) with VQ35 engine ONLY 2004-2009 Quest (V42) IF YOU CONFIRM: There is a high frequency buzzing / whining noise coming from the secondary timing chain system. • The noise should increase in frequency with engine speed (RPM). • If the noise does not increase with engine speed, the timing chain system may not be the cause. Refer to the appropriate section of the Electronic Service Manual (ESM) for further diagnosis. ACTION: 1. Replace both secondary timing chains and both secondary timing chain tensioner “shoes” with the ones from the PARTS INFORMATION section of this bulletin (on Page 2). 2. Change the engine oil and filter. 3. For repair procedure, refer to the SERVICE PROCEDURE section of this bulletin (starting on Page 3). SERVICE PROCEDURE Write down all radio station presets. Presets 1 2 3 4 5 6 A B C 2. Disconnect both battery cables, negative cable first.… Read More

2004-2005 Ford F-150 CAMSHAFT AND LASH ADJUSTER DESIGN CHANGE

Filed Under (Ford) by admin on 03-11-2011

Download ISSUE The 5.4L 3-valve engine lash adjuster and camshaft design has been modified for the 2005 model year (MY). Do not use 2005 MY parts when servicing a 2004 MY engine, or 2004 MY parts when servicing a 2005 MY engine. If parts are intermixed during a service repair, the engine may exhibit noises on affected cylinders and engine damage may result. ACTION Order and install parts for the correct model year engine. The following Inspection Procedure can also be used to visually confirm the application of a part. NOTE Figure 2 – Article 04-24-24 THE ENGINE MODEL YEAR SHOULD BE 2004 and 2005 MY lash adjusters can be visually CONFIRMED BY CHECKING THE ENGINE TAG identified by the presence or lack of an identification LOCATED ON THE VALVE COVER. A 2004 MY groove cut into the lash adjuster boss (Figure 3). ENGINE WILL HAVE CODE 4G-692-AA AND A The 2005 MY parts will have this identification 2005 MY ENGINE WILL BE IDENTIFIED AS groove cut into the boss, while the 2004 MY parts 5G-692-AA.… Read More

You might also likeclose