buick century 2001 timing chain whine frequency increases with rpm

You search Auto repair manual PDF about buick century 2001 timing chain whine frequency increases with rpm, search results will appear below. If search results do not exist, please search by others keyword.

2000 Jaguar S-Type (X200) Primary Timing Chain LH

Filed Under (Jaguar) by admin on 17-03-2014

  Download 2000 Jaguar S-Type (X200) Primary Timing Chain LH

Download 2000 Jaguar S-Type (X200) V8-4.0L (AJ28) – Left-Hand Primary Timing Chain LH. Special Service tools Camshaft Setting Tool 303-530 Timing chain tensioning tool 303-532 Wedges, primary chain 303-533 Variable Camshaft Timing Oil Control Unit Setting Tool 303-654 Crankshaft setting, main tool 303-645 Removal 1. Remove the right-hand bank primary timing chain. See: Right-Hand 2. Remove the VVT solenoid. 3. Remove the VVT bush carrier. 4. Install the camshaft locking tool 303-530 to the left-hand bank camshafts, aligning the shafts as necessary. 5. Loosen the exhaust camshaft sprocket bolt. 6. Loosen the intake camshaft VVT unit bolt. 7. Remove the primary chain tensioner bolts. 8. Remove the tensioner assembly. 1. Remove the tensioner. 2. Remove the tensioner back-plate. 9. Remove the chain tensioner blade. 1. Remove the tensioner blade pivot bolt. 2. Remove the tensioner blade. 10. Remove the left-hand bank timing chain. Installation 1. Install the chain tensioning tool 303-532 to the exhaust camshaft sprocket.… Read More

  Download 2000 Jaguar S-Type (X200) Primary Timing Chain LH

2001 Daewoo Leganza SE TIMING BELT REMOVAL and INSTALLATION

Filed Under (Daewoo) by admin on 01-01-2014

  Download 2001 Daewoo Leganza SE TIMING BELT REMOVAL and INSTALLATION

Download 1. Disconnect negative battery cable. Disconnect intake air temperature sensor connector from intake air duct. Disconnect the air intake tube from the throttle body. Disconnect the breather tube from the valve cover. Remove resonator from throttle body. Remove air filter housing. 2. Raise and support the vehicle. Remove right front wheel. Remove right front splash shield from wheelwell. Remove serpentine accessory drive belt. 3. Remove crankshaft pulley bolts. It is NOT necessary to remove crankshaft sprocket center bolt. Remove crankshaft pulley. Lower vehicle. 4. Support engine assembly from above with Support Fixture (J-28467-B). See Fig. 1 . Remove engine mount bracket from timing belt end of engine. See Fig. 2 . 5. Remove power steering hose clamp bolt, and position hose away from timing belt cover. Remove front timing belt cover. See Fig. 3 . Using crankshaft center bolt, rotate crankshaft one full turn clockwise (as viewed from timing belt end of engine).… Read More

  Download 2001 Daewoo Leganza SE TIMING BELT REMOVAL and INSTALLATION

2000 Dodge Intrepid Timing Chain: Service and Repair

Filed Under (Dodge) by admin on 30-01-2014

  Download 2000 Dodge Intrepid Timing Chain: Service and Repair

Download 1.Remove upper intake manifold. 2.Remove cylinder head covers, crankshaft damper, and timing chain cover. CAUTION: When aligning timing marks, always rotate engine by turning the crankshaft. Failure to do so will result in valve and/or piston damage. Fig. 70 3.Align crankshaft sprocket timing mark to mark on oil pump housing (Fig. 70). The mark on oil pump housing is 60° ATDC of #1 cylinder. CAUTION: When the timing chain is removed and the cylinder heads are still installed, DO NOT rotate the camshafts or crankshaft without first locating the proper crankshaft position. Failure to do so will result in valve and/or piston damage. Fig. 74 4.Remove primary timing chain tensioner from right cylinder head (Fig. 74). 5.Remove camshaft position sensor from left cylinder head (Fig. 69). Fig. 69 6.Remove chain guide access plug from left cylinder head (Fig. 69). NOTE: When camshaft sprocket bolts are removed, the camshafts will rotate in a clockwise direction.… Read More

  Download 2000 Dodge Intrepid Timing Chain: Service and Repair

2001 Ford Escort ZX2 Timing Belt Service and Repair

Filed Under (Ford) by admin on 15-12-2013

  Download 2001 Ford Escort ZX2 Timing Belt Service and Repair

Download 2001 Ford Escort ZX2 L4-2.0L DOHC VIN 3 Vehicle Level Engine, Cooling and Exhaust Engine Timing Belt Service and Repair. Removal 1. Grasp the spark plug boot firmly and with a twisting pulling motion, disconnect the spark plug wires from the spark plugs. 2. NOTE: If an original spark plug is reused, install it in the cylinder from which it was removed. New spark plugs can be used in any cylinder. NOTE: Use compressed air to remove any foreign material from the spark plug well before removing the spark plugs. Remove the spark plugs . 3. Remove the valve cover. 4. Disconnect the heated oxygen sensor (HO2S) electrical connector. 5. Remove the timing belt covers. 6. Remove the catalytic converter. 7. NOTE: Cylinder No. 1 is at top dead center (TDC) when the keyway is in the 12 o’clock position. Position cylinder No. 1 just prior to TDC. 8. Remove the stud bolt.… Read More

  Download 2001 Ford Escort ZX2 Timing Belt Service and Repair

1995 Nissan-Datsun 200SX Engine-Timing Chain/Front Cover Revised Procedure

Filed Under (Nissan) by admin on 15-02-2014

  Download 1995 Nissan-Datsun 200SX Engine-Timing Chain/Front Cover Revised Procedure

Download 1991-94 Sentra (B13) w/GA16DE 1991-93 NX1600 (B13) 1995-99 Sentra (B14) w/GA16DE 1995-98 200SX (B14) w/GA16DE SERVICE INFORMATION A revised service procedure for the engine front cover/timing chain has been adopted for the GA16DE. It is no longer recommended to remove the cylinder head when removing the timing chain/front cover(s). Utilize the following steps when servicing the front cover, timing chain, guides or tensioner(s) PARTS INFORMATION CLAIMS INFORMATION Please reference the “Revision C” pages of the Nissan “1992-1999 Warranty Flat Rate Information Manual”, Section “AG”, Op Codes AG12AA, AG14AA, AG142A, AG143A, AG144A and AG24AA. Also reference Section “CA”, Op Codes CA20AA and CA22AA. You will note that the descriptions and flat rate times applicable to the B13 and B14 vehicles (with GA16DE engines) for these Op Codes have been revised to reflect this new procedure. Caution ^After removing the timing chain, do not turn the crankshaft and camshaft separately or the valves will strike the piston heads.… Read More

  Download 1995 Nissan-Datsun 200SX Engine-Timing Chain/Front Cover Revised Procedure

NISSAN MAXIMA / ALTIMA / QUEST; BUZZING / WHINING NOISE FROM TIMING CHAIN AREA

Filed Under (Nissan) by admin on 02-01-2014

  Download NISSAN MAXIMA / ALTIMA / QUEST; BUZZING / WHINING NOISE FROM TIMING CHAIN AREA

Download 2004-2008 Maxima (A34) 2004-2006 Altima (L31) with VQ35 engine ONLY 2004-2009 Quest (V42) IF YOU CONFIRM: There is a high frequency buzzing / whining noise coming from the secondary timing chain system. • The noise should increase in frequency with engine speed (RPM). • If the noise does not increase with engine speed, the timing chain system may not be the cause. Refer to the appropriate section of the Electronic Service Manual (ESM) for further diagnosis. ACTION: 1. Replace both secondary timing chains and both secondary timing chain tensioner “shoes” with the ones from the PARTS INFORMATION section of this bulletin (on Page 2). 2. Change the engine oil and filter. 3. For repair procedure, refer to the SERVICE PROCEDURE section of this bulletin (starting on Page 3). SERVICE PROCEDURE Write down all radio station presets. Presets 1 2 3 4 5 6 A B C 2. Disconnect both battery cables, negative cable first.… Read More

  Download NISSAN MAXIMA / ALTIMA / QUEST; BUZZING / WHINING NOISE FROM TIMING CHAIN AREA

1997 Ford Truck F 150 Timing Chain Installation

Filed Under (Ford) by admin on 06-06-2013

  Download 1997 Ford Truck F 150 Timing Chain Installation

Download 1997 Ford Truck F 150 2WD Pickup V8-5.4L SOHC VIN L Vehicle Level Engine, Cooling and Exhaust Engine Timing Chain Service and Repair Installation Installation. NOTE: Ford does not provide a procedure to align the timing components without the OE tools specified. 1. Compress the tensioner plunger, using an edge of a vise. CAUTION: Timing chain procedures must be followed exactly or damage to valves and pistons will result. Do not compress the ratchet assembly. This will damage the ratchet assembly. 2. Use a small screwdriver or pick to push back and hold the ratchet mechanism. 3. While holding the ratchet mechanism, push the ratchet arm back into the tensioner housing. 4. Install a paper clip into the hole in the tensioner housing to hold the ratchet assembly and plunger in during installation. 5. Remove the tensioner from the vise. 6. Check the illustrated components for part number orientation. 7.… Read More

  Download 1997 Ford Truck F 150 Timing Chain Installation

2001 Honda Prelude Timing Belt Removal and Installation

Filed Under (Honda) by admin on 31-12-2013

  Download 2001 Honda Prelude Timing Belt Removal and Installation

Download 2001 Honda Prelude L4-2157cc 2.2L DOHC (VTEC) MFI Vehicle Level Engine, Cooling and Exhaust Engine Timing Belt Service and Repair Removal and Installation. REMOVAL NOTE: * Turn the crankshaft pulley so the No. 1 piston is at Top Dead Center (TDC) before removing the belt. * Inspect the water pump after removing the timing belt. * Replace the timing belt and timing balancer belt at 105,000 miles (168,000 km) according to the maintenance schedule (normal conditions/severe conditions). If the vehicle is regularly driven in one or more of the following conditions, replace the timing belt and timing balancer belt at 60,000 miles (U.S.A.) 100,000 km (Canada). * In very high temperatures (over 110°F, 43°C). * In very low temperatures (under -20°F, -29°C). 1. Make sure you have the anti-theft code for the radio, then write down the frequencies for the radio’s preset buttons. 2. Disconnect the battery negative terminal first, then the positive terminal.… Read More

  Download 2001 Honda Prelude Timing Belt Removal and Installation

2001 Infiniti QX4 Direct-Hit – Hotline Archive Detail

Filed Under (Infiniti) by admin on 16-12-2013

  Download 2001 Infiniti QX4 Direct-Hit – Hotline Archive Detail

Download Vehicle Application: 2001 Infiniti QX4 3.5L, USA/Canada 2002 Nissan Pathfinder 3.5L, USA/Canada 2001 Nissan Pathfinder 3.5L, USA/Canada2003 Infiniti QX4 3.5L, USA/Canada Customer Concern: The check engine light is on with a trouble code P1140. Tests/Procedures: 1. Check the right side (passenger side) Intake Valve Timing Control Position (IVTCP) sensor for 12 volts on the Black/White wire. 2. Check the IVTCP sensor for a good ground on the Black wire. 3. Scope the Yellow/Green signal wire and look for a square wave signal of around 8 volts. Check the pattern of the right side sensor and if unsure of the pattern, compare it to the left bank sensor. Potential Causes: IVTCP Sensor Wiring — IVTCP sensor wiring/connection. Tech Tips: This code is for the right (passenger) bank IVTCP Sensor or sensor circuit. The right and left bank sensors can be swapped from side to side to see if the code will follow the sensor.… Read More

  Download 2001 Infiniti QX4 Direct-Hit – Hotline Archive Detail

1994-2001 Acura Timing Belt Installation Procedure

Filed Under (Acura) by admin on 01-01-2014

  Download 1994-2001 Acura Timing Belt Installation Procedure

Download 1.8LB18 Series Engines The AERATechnical Committee offers the following information regarding timing belt installation procedures on 1994-2001 Acura 1.8LB18 Series engines. Failure to follow these procedures could result in engine damage. 1. Position the crankshaft and the camshaft pulleys as shown in Figure 1 before installing the timing belt. a. Set the crankshaft so that the No. 1 piston is at top dead center (TDC). Align the groove on the teeth side of the timing belt drive to the “arrow mark” pointer on the oil pump. b. Align the TDC marks on intake and exhaust pulleys. 2. NOTE: To set the camshafts at TDC position for the No. 1 piston, align the holes in the camshafts with the holes in No. 1 camshaft holders and insert 5.0 mm pin punches in the holes. 3. Install the timing belt tightly in the sequence shown in Figure 2. 1) Timing belt drive pulley (crankshaft) 2) Adjusting pulley 3) Water pump pulley 4) Exhaust camshaft pulley 5) Intake camshaft pulley 4.… Read More

  Download 1994-2001 Acura Timing Belt Installation Procedure

You might also likeclose