2012 gmc sierra rear clicking noise

You search Auto repair manual PDF about 2012 gmc sierra rear clicking noise, search results will appear below. If search results do not exist, please search by others keyword.

Ticking or Knocking Type Noise Coming From Engine or Transmission Area

Filed Under (Other Manuals) by admin on 10-12-2013

Download Subject: L36, L67, L26, L32, LA1, LX9, MN7, M15 Ticking or Knocking Type Noise Coming From Engine or Transmission Area (Replace Flexplate and Torque Converter) Models: 2005 Buick Park Avenue 2005-2006 Buick Allure (Canada Only), LaCrosse, LeSabre, Rendezvous, Terraza 2005 Chevrolet Impala, Monte Carlo, Venture 2005-2006 Chevrolet Malibu, Malibu Maxx, Uplander 2005 Pontiac Aztek, Bonneville 2005-2006 Pontiac Grand Prix, G6 GTP, Montana SV6 2006 Saturn Relay AWD with 3800 3.8L Series III V6 Engine (VINs K, 1, 2, 4, – RPOs L36, L67, L26, L32) or 3500 3.5L V6 Engine (VINs L, 8 RPO LX9) or 3400 3.4L V6 Engine (VIN E – RPO LA1) and Hydra- Matic(R) 4T65-E Transmission (RPOs MN7, M15) Supercede: This bulletin is being revised to update the pictures for better clarification. Please discard Corporate Bulletin Number 06-06-01-014B (Section 06 – Engine/Propulsion System). Condition Some customers may comment on a ticking or knocking type noise coming from the engine or transmission area.… Read More

2009 Ford Escape INTERMITTENT CYLINDER HEAD CAMSHAFT KNOCK/THUMP NOISE

Filed Under (Ford) by admin on 16-03-2014

Download FORD: MERCURY: 2009 Escape 2009 Mariner This article supersedes TSB 09-11-6 to update the b. Isolate noise to LH – Listen to the cylinders Service Procedure and Part List. 4 and 6 valve cover fasteners (number 6 is by the coolant pump). There will be a ISSUE significant difference in transmitted noise Some 2009 Escape and Mariner vehicles, equipped between the cylinder 4 and 6 fasteners with 3.0L engine, may exhibit an intermittent when noise is present. Noise from LH – go knocking or thumping type noise from the cylinder to Step 4. head. After engine temperature reaches 210-220 °F NOTE (99-104 °C), the noise is typically heard from the THE RH AND LH NOISES HAVE DIFFERENT rear of the engine as the vehicle comes to a stop. CAUSES. FOLLOW ALL STEPS CAREFULLY FOR An example would be coming to a stop at the end PROPER DIAGNOSIS AND REPAIR. of a highway exit ramp.… Read More

Clunk, Bump or Squawk when Vehicle Comes to Complete Stop

Filed Under (Other Manuals) by admin on 02-04-2014

Download 1999-2000 Cadillac Escalade (Old Style) 2002-2004 Cadillac Escalade, Escalade EXT 2003-2004 Cadillac Escalade ESV 1996-1999 Chevrolet 1500 Series Extended Cab Short Box Pickup (Old Style) 1996-1999 Chevrolet 1500 Series Regular Cab Pickup and Utility Models (Old Style) 1999-2002 Chevrolet Silverado Extended Cab Short Box (New Style) 1999-2004 Chevrolet Silverado 1500 Series Regular Cab (New Style) 2000-2004 Chevrolet 1500 Series Avalanche, Suburban and Tahoe 2001-2004 Chevrolet Silverado 2500/3500 Series Regular Cab with Long Bed or Extended Cab (New Style) 2001-2004 Chevrolet Silverado 2500 Series Crew Cab, Short Box (New Style) 1996-1999 GMC 1500 Series Extended Cab Short Box Pickup (Old Style) 1996-1999 GMC 1500 Series Regular Cab Pickup and Utility Models (Old Style) 1999-2002 GMC Sierra Extended Cab Short Box (New Style) 1999-2004 GMC Sierra 1500 Series Regular Cab (New Style) 2000-2004 GMC 1500 Series Yukon, Yukon XL 2001-2004 GMC Sierra 2500/3500 Series Regular Cab with Long Bed or Extended Cab (New Style) 2001-2004 GMC Sierra 2500 Series Crew Cab, Short Box (New Style) 2003-2005 HUMMER H2 with Four Wheel Drive (4WD) or All Wheel Drive (AWD) and One-Piece Propeller Shaft ONLY.… Read More

2007 Toyota Camry Rear Bumper Removal and Replacement

Filed Under (Toyota) by admin on 06-04-2014

Download REMOVAL 1. REMOVE REAR BUMPER ASSEMBLY (w/o Rear Lower Spoiler ) a. Put protective tape around the rear bumper assembly. b. Using a screwdriver, open the 2 rear bumper plates. HINT: Tape the screwdriver tip before use. c. Remove the 6 screws and 2 clips. d. Disengage the 12 claws and disconnect the rear bumper assembly as shown in the illustration. HINT: Use the same procedures for the RH side and LH side. e. Remove the rear bumper assembly. 2. REMOVE REAR FLOOR BOARD (w/ Rear Lower Spoiler ) a. Remove the 4 screws, 2 clips, 3 nuts and rear floor board. 3. REMOVE REAR BUMPER ASSEMBLY (w/Rear Lower Spoiler) a. Put protective tape around the rear bumper assembly. b. Using a screwdriver, open the 2 rear bumper plates. HINT: Tape the screwdriver tip before use. c. Remove the 6 screws. d. Disengage the 12 claws and disconnect the rear bumper assembly as shown in the illustration.… Read More

2001 Mercury Cougar Rear Brakes – Moaning/Groaning Noise

Filed Under (Ford) by admin on 09-12-2013

Download MERCURY: 1999-2001 COUGAR ISSUE Some vehicles equipped with rear disc brakes may exhibit a “moaning/groaning” noise on initial brake application (cold soak). This may be caused by the rear brake pads vibrating in the caliper. Braking performance is not affected by this condition. ACTION Install revised Rear Disc Brake Service kit. Refer to the following Service Procedure for details. SERVICE PROCEDURE ^BRAKES – REAR BRAKE NOISE- “MOANING/GROANING” FROM REAR BRAKES WHEN COLD ^NOISE – “MOANING/GROANING” FROM REAR BRAKES WHEN COLD 1. Lift and support vehicle. Refer to the appropriate Workshop Manual, Section 100-01. 2. Remove both rear tire assemblies. 3. Remove rear brake pads per instructions in the Workshop Manual, Section 206- 04. 4. Remove U-spring from the top of the caliper and replace with L-spring supplied in kit (Figure 1). 5. Remove adhesive backing protection from new pads with C-springs (Figure 2) and install new pads into caliper. Use Pads XS7Z-2200-M for vehicles without 6.… Read More

2009-2010 Ford Expedition LOW FREQUENCY ENGINE KNOCKING NOISE AT HOT IDLE

Filed Under (Ford) by admin on 31-12-2013

Download 2009-2010 Ford Expedition LOW FREQUENCY ENGINE KNOCKING NOISE AT HOT IDLE. FORD: 2009-2010 Expedition, F-150 LINCOLN: 2009-2010 Navigator. 6. Open Data Logger. ISSUE Some 2009-2010 F150 vehicles equipped with a 7. Select Powertrain Engine. 4.6L 3V or 5.4L 3V engine, Expedition and Navigator vehicles may exhibit a low frequency 8. Select PCM Data Logger. knocking noise from the engine at hot idle only. The 9. Clear the preselected items by clicking the noise is predominately heard from the right front eraser icon button. wheel well area and/or the right hand (RH) engine cam cover. This noise may be generated from the 10. Select variable cam timing desired angle RH variable camshaft timing (VCT) phaser number (VCT_DSD). assembly. This procedure was created to diagnose the RH VCT phaser assembly. 11. Go to live display and press the tick mark. 12. Make sure the parameter identification (PID) is ACTION highlighted with the dark lines above and below Follow the Service Procedure steps to correct the the data being displayed.… Read More

1997-2001 Honda CR-V Noise From the Rear Differential

Filed Under (Honda) by admin on 30-12-2013

Download SYMPTOM A screech or whine from the rear differential when making a tight turn at low speed (for example, in a parking lot when 4WD engages). PROBABLE CAUSE The differential fluid is contaminated or broken down, providing insufficient lubrication. CORRECTIVE ACTION Replace the dual pump fluid, and test-drive the vehicle. If necessary, replace the rear differential clutch, replace the oil pump assembly (1997 model only), and add a flow collar. PARTS INFORMATION Flow Collar Kit: P/N 41431-P6R-000, H/C 6839724 Differential Clutch Set: P/N 48010-P6R-305, H/C 6627566 Oil Pump Set (1997 model only): P/N 48100-P1D-305, H/C 6839716 REQUIRED MATERIALS Dual Pump Fluid: P/N 08200-9002, H/C 6512644 Liquid Gasket (Hondabond HT): P/N 08718-0001, H/C 2963817. REPAIR PROCEDURE 1. Drain and refill the rear differential with Dual Pump Fluid. 2. Check the tires for proper inflation (recommended cold inflation front and rear is 26 psi) and any variation in tire size or type.… Read More

2007-2008 Toyota Tundra Rear Driveshaft/Propeller Shaft Clunk/Thunk Noise

Filed Under (Toyota) by admin on 10-03-2014

Download 1. Confirm that the condition is the rear driveshaft clunk/thunk noise. A. Test drive the vehicle and confirm the customer’scomplaint. B. Place the transfer casein 4WDHighwiththe center differential lock ed. Remove the rear driveshaft and test drive the vehicle. Refer to the Technical Information System (TIS), 2007 or 2008 model year Tundra Repair Manual, Drivetrain -Driveshaft/Propeller Shaft-”Propeller Shaft: Propeller Shaft Assembly (for 4WD): Removal” C. Is the clunk/thunk noise eliminated when coming to a stop and/or when accelerating froma stop? •If Yes-Replace rear driveshaft (propeller shaft assembly). Go to Step 2. •If No-This TSB does NOT apply. Continue diagnosis to isolate cause of condition. 2. Install the NEW driveshaft (propeller shaft) assembly. Refer to TSB DL 001-07 for the installation method for 3 joint driveshaftassemb lies on 2007 model year Tundra. Refer to TIS, 2007 or 2008 model year Tundra Repair Manual, Drivetrain -Driveshaft/Propeller Shaft-”Propeller Shaft: Propeller Shaft Assembly (for 4WD): Installation” NOTE Re-usethespacers provided under the center support bearing to ensure the proper alignment of the center support bearing.… Read More

1997 Taurus/Sable Shock Absorber Strut Assembly

Filed Under (Ford) by admin on 31-12-2013

Download 1. CAUTION: Do not raise vehicle by rear suspension tension strut and bushing (5A952). Damage to strut may result. Raise hoist or jack only enough to contact body. Refer to Section 00-02 . 2. Remove package tray trim panel and loosen but do not remove three nuts retaining the upper rear shock absorber bracket (18192) to body. 3. Raise vehicle. Remove wheel and tire assembly. 4. Remove bolt retaining brake load sensor proportioning valve (2B547) to rear suspension arm and bushing (5500). 5. Remove clip attaching rear brake hose (2282) to shock strut bracket and carefully move rear brake hose out of the way. Disconnect electronic shock actuator, if equipped. 6. Remove stabilizer bar bracket (5486) from body. 7. Remove nut and washer attaching rear stabilizer bar (5A772) to rear stabilizer bar link (5664) and separate rear stabilizer bar from rear stabilizer bar link. 8. Remove nut, washer and rear suspension tie rod bushing (5K897) retaining rear suspension tension strut and bushing to rear wheel spindle (4A013).… Read More

2009 FIT MUGEN REAR UNDER SPOILER INSTALLATION INSTRUCTION

Filed Under (Honda) by admin on 01-01-2014

Download NOTE: The rear under spoiler cannot be installed on a vehicle equipped with splash guards. PARTS LIST Rear under spoiler 4 Washer bolts (6 x 15 mm) TOOLS REQUIRED Phillips screwdriver Flat-tip screwdriver Hex wrench Drill 5 mm Allen wrench 3 mm, 6 mm and 10 mm Drill bits Clip remover Center punch Pushpin Airsaw Utility knife Felt-tip pen Scale Masking tape Isopropyl alcohol Shop towel Eye protection Blanket INSTALLATION Customer Information: The information in this installation instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle. These procedures should not be attempted by “do-it-yourselfers.” NOTE: •Allow the exhaust pipe to cool down before installing this accessory. •Be careful not to damage the rear bumper and the paint finish. •This rear under spoiler kit should be installed only if the ambient temperature is 60°F (15°) or above.… Read More

You might also likeclose