2007-2008 Honda Civic SI Exhaust System Manual Installation Instructions

Download
Borla Performance Cat-Back™ Exhaust System (Part number 140283) has been designed for the 2007-2008 Honda Civic SI sedan equipped with a 2.0L 4 cylinder engine, front wheel and a manual transmission. Borla Performance Cat-Back™ Exhaust System (Part number 140284) has been designed for the 2007-2008 Honda Civic SI coupe equipped with a 2.0L 4 cylinder engine, front wheel and a manual transmission.
Original Exhaust System Removal : Note: With a used vehicle, we suggest a penetrating spray lubricant to be applied liberally to all exhaust fasteners and allowing a significant period of time for the chemical to lubricate the threads before attempting to disassemble. 1. Unbolt the flange located just in front of the rear muffler. 2. Lubricate all the hangers and rubber isolators. 3. Using a muffler stand or an additional person to hold the rear muffler into position, remove the hangers from the rubber isolators and remove the rear muffler from the vehicle as shown in figure 1.… Read More

2007 Honda Accord CR-V and Civic Remote Engine Starter FAQ

Download
Model Information Release date for Accord Remote Starter System: September 20, 2007 Release date for CR-V and Civic Remote Starter System: End of September 2007 Technical Questions Q: What does the Honda Remote Engine Starter System do? A: The Honda Remote Engine Starter is a two-way remote system that starts and stops your vehicle’s engine anywhere within a 200-foot range. It’s designed to warm up your vehicle in the winter and cool it down in the summer. Q: How much is the Honda Remote Engine Starter? A: Approximately $499.00 without installation for all applicable Honda models. Check with your Honda dealer for the installation cost. Q: Can I install it myself? A: AHM does not recommend that customers install the Honda Remote Engine Starter due to the complexity of its electrical components. Authorized Honda Technicians are professionally trained to safely install the Remote Engine Starter. Q: Can I have my neighborhood audio shop install the Honda Remote Engine Starter?… Read More

2005 HONDA CR-V DOOR VISORS INSTALLATION INSTRUCTIONS

Download
PARTS LIST Left front door visor Right front door visor Left rear door visor Right rear door visor Installing the Front Door Visor 1. Lower the front door glass completely. Remove the door glass run channel from the door sash in the area shown. Do not remove the glass run channel from the door mirror base or the rear end of the door. AII 27171 TOOLS REQUIRED Isopropyl alcohol Shop towel Masking tape INSTALLATION NOTE: •These instructions show the left door visors being installed. The same procedure applies to installing of the right door visors. Be careful not to damage the paint finish or glass run channels when installing the door visors. Handle the door visors with care. They are not designed to absorb shock or impact. This door visor kit should be installed only if the ambient air temperature is 60°F (15°C) or above. To allow the adhesive to cure, do not wash the vehicle for 24 hours.… Read More

Honda Civic D-series Racing Intake Manifold Manual Installation Instructions

Download
Part # 307-05-0260 Racing Intake Manifold For Models and Years • 1992-1995 Honda Civic DX/EX (D15B7/D16Z6) • 1996-2000 Honda Civic EX (D16Y8) • 88-91 Honda CRX Si / DX* (*These models will require additional parts)
Additional Parts List and Installation Notes for CRX Installation Parts Required • 95-95 Civic throttle body and gasket. • 92-95 Civic fuel rail (use 88-91 civic injectors). • 92-95 Civic throttle cable and bracket. • 88-91 CRX intake gasket. • 3 1/2 Feet of vacuum line. • 2 Feet of 3/8″ water hose for “IAC” (lines need to be lengthen). • 1 Vacuum line “T” (to re-connect purge control valve).
Removal 1. Allow car to cool to ambient temperature. DO NOT attempt to work on warm or hot vehicle. 2. Drain coolant. 3. Relieve fuel pressure by loosening banjo bolt on top of fuel filter. Disconnect the fuel line at fuel rail. It is recommended that the washers be replaced.… Read More

Honda Civic Racing Intake Manifold Installation Instruction

Download Additional Parts List and Installation Notes for CRX Installation Parts Required • 95-95 Civic throttle body and gasket. • 92-95 Civic fuel rail (use 88-91 civic injectors). • 92-95 Civic throttle cable and bracket. • 88-91 CRX intake gasket. • 3 1/2 Feet of vacuum line. • 2 Feet of 3/8″ water hose for “IAC” (lines need to be lengthen). • 1 Vacuum line “T” (to re-connect purge control valve). Notes • There is no need to reinstall the fast idle valve; located on the drivers side of the rear of stock manifold ( there is no check engine light). • Due to engine mounting tolerances, the firewall may need to be clearanced. • The stock intake pipe will not fit. An aftermarket intake pipe will need to be purchased. • Modify stock map sensor / purge control valve bracket for clearance of TPS. • Use 88-91 CRX injectors and fuel regulator.… Read More

Honda VTX 1800 Big Air Kit (BAK) Installation Instructions

Download INCLUDED IN THE KIT: (1) BAK Cover (1) Re-usable Performance Air Filter (1) Filter Raincoat (1) Mounting Post (4) M5x40 Stainless Cap Screws (2) M5x10 Stainless Cap Screws (1) Baron VTX 1800 BAK Backing Plate (1) Baron Backing Plate Adapter (2) 1/4-28 x 1 13/16″ Zinc Hex Bolts (2) 1/4″ Lock Washers (2) Aluminum Filter Spacers (3) M6x16 Hex Flange Bolts (3) External Tooth Washers (1) Reed Valve Block Off Kit BA-2561-00 (1) 3/8″ Nylon Nipple Pre-installed (1) 1/2″ Nylon Nipple Pre-installed TOOLS REQUIRED: Factory Service Manual 3, 4 & 5 mm Allen Wrenches 10, 12 & 14mm Sockets 12 & 14mm Wrenches INSTRUCTIONS: 1. Remove fuel tank per Honda service manual instructions. 2. Remove air filter box by taking out air filter element and the 4 screws around air funnels. 3. Disconnect electrical fitting from the IAT sensor (intake air temp sensor). 4. Disconnect two hoses on back of air box.… Read More

2007-2008 Acura TL Type S CABIN AIR FILTER IDENTIFICATION

Download Acura CSX, CSX Type S, MDX, RDX, RL, TL, TL Type S, TSX; Honda Accord, Accord Hybrid, Civic, Civic Hybrid, CR-V, Odyssey, Pilot, Ridgeline OE: 80292-SEC-A01 Fits: 2007-on Acura CSX, CSX Type S, MDX, RDX, Honda CR-V 2005-on Acura RL, Honda Odyssey 2004-on Acura TL, TSX 2007-08 Acura TL Type S 2003-on Honda Accord 2005-07 Honda Accord Hybrid 2006-on Honda Civic, Ridgeline 2 006-09 Honda Civic Hybrid 2009-on Honda Pilot. 1. Open passenger side door. 2. Open glove compartment. 3. Detach damper rod from glove compartment. 4. Push in on left and right sides of glove compartment to release glove compartment. If equipped with tabs: a. Close glove compartment part way to relieve pressure on tabs. b. Push in tabs on outside of glove compartment to release glove compartment. c. Remove tabs. 5. Remove screws on left and right sides (if equipped) while holding glove compartment. 6. Flip down glove compartment.… Read More

2008 Honda CRF250R/450R Owners Manual

Download
2008 CRF250R Details: 1. Honda Progressive Steering Damper (HPSD) 2. Triple clamps with 22mm offset 3. Fork upper reduced in length by 2mm 4. Cartridge fork features new low-friction pistons and 12.5mm cartridge rod (up from 12.0mm) 5. Stiffer 0.46 kg/mm fork spring 6. Fork springs polished for less friction 7. New fork valving 8. New rear shock valving 9. New rear fender decreases mud accumulation around mufflers 10. New piston raises compression ratio from 12.9:1 to 13.1:1 11. New cylinder head porting increases power at all engine speeds 12. New camshaft timing for added power 13. Lighter valves and rocker arms 14. Maximum engine rpm now 13,500 (+ 130 rpm) 15. New piston ring for lower oil consumption 16. New clutch features stiffer clutch springs and a judder spring to improve clutch feel 17. All-new dual mufflers and exhaust system improve mid-range power 18. New lighter counter-balancer shaft and drive gears.… Read More

2006-2007 Honda Civic Uneven or Rapid Rear Tire Wear

Download 2006-07 Civic 2-Door – ALL Except Si and Honda Accessory HFP Package. 2006-07 Civic 4-Door – ALL Except Si. Uneven or Rapid Rear Tire Wear NOTE: To ensure a proper repair and proper reimbursement, you must read this entire service bulletin before doing any work. SYMPTOM The customer may complain of uneven or rapid rear tire wear, a roaring noise from the rear, and/or a vibration at highway speeds. PROBABLE CAUSE The combination of the tires and the rear suspension geometry may cause rapid and uneven rear tire wear. Tires in an advanced stage of this diagonal or inner edge wear may cause vibration and/or a bad bearing type noise. (For more details, see TIRE INSPECTION AND QUALIFICATION on page 2). CORRECTIVE ACTION Install a rear upper control arm kit, replace the flange bolts, replace the worn tires (see the Tire Replacement Information chart on this page), and do a four-wheel alignment.… Read More