2005 ford focus muffler bracket broke

You search Auto repair manual PDF about 2005 ford focus muffler bracket broke, search results will appear below. If search results do not exist, please search by others keyword.

Ford Powerstroke 7.3L Walker BTM Reference Installation Guide

Filed Under (Ford) by admin on 22-01-2014

Download Walker #21470 ‘Big Truck’ muffler installed Walker muffler install, looking forward Close up of muffler install, looking back. Test Fitting Walker #21470 muffler Front muffler hanger welded on (from the stock Ford muffler) The ‘S’ bend was rotated 180 degrees Factory ‘S’-bend that was removed and cut. The hardest part of the install was getting this piece off the stock system, as the clamp ‘crimped’ it in place. 6″ section of stock pipe that was cut-off Stock 3.5″ diameter exhaust Front mount details, showing the muffler hanger, removed from the stock muffler and welded to the Walker muffler. Also shows the position of the relocated front muffler hanger bracket. The stock front muffler hanger bracket, that was relocated forward, about 12″, to support the longer Walker muffler. Use existing bolt hole in the frame. Use standard muffler hanger for rear muffler support details. Stock muffler hanger to be removed and welded to the Walker muffler.… Read More

2000-2002 Ford Focus ZX3 Edelbrock Header INSTALLATION INSTRUCTIONS

Filed Under (Ford) by admin on 02-01-2014

Download Disassembly 1. Raise and support the vehicle on a flat stable surface using the floorjack and proper load rated jackstands. 2. Disconnect the battery. 3. Remove three nuts that retain catalytic converter to the stock manifold. 4. Unplug and unclip oxygen sensor wires. There are two sensors; one is located above the catalytic converter, and the second sensor is located below the catalytic converter. The wiring for the lower sensor is clipped to the electric fan bracket. 5. Remove E.G.R. line from catalytic converter. 6. Remove the two bolts retaining the catalytic converter pipe to the intermediate pipe and the two bolts for the catalytic pipe bracket. 7. Remove the two nuts to the catalytic converter retaining bracket and remove the catalytic converter. 8. Remove the dipstick tube, power steering line INSTALLATION INSTRUCTIONS brackets, and the E.G.R. line bracket. Remove the stud from the driver’s side of the cylinder head that was used to hold the power steering line and the E.G.R.… Read More

1998-2005 Ford Focus 57A-6029 APOLLO INSTALLATION INSTRUCTIONS

Filed Under (Ford) by admin on 10-12-2013

Download 1. Disconnect the negative terminal from the vehicle battery. 2. Disconnect & remove the harness plug from the MAS (Mass Air Sensor). (Fig. 1) 3. Unclip & remove the intake hose from the MAS. (Fig. 2&3) 4. Remove the breather hose from the cam cover. (Fig. 4) 5. Carefully lift the air box assembly from its mounting rubbers & remove the complete air box assembly from the vehicle. (Fig. 5) 6. Assemble the saddle bracket / mounting bracket using the allen head bolt, nylon conical washer, flat metal washer & nylock nut. (Fig. 6) 7. Fit the saddle bracket assembly to the hole located on the ignition pack mounting bracket & secure using the M6 bolt, nylock nut & flat washers as shown (if fitted, reposition the small electrical unit to allow access to the mounting hole). (Fig. 7) 8. Carefully unscrew & remove the MAS from the air box lid.… Read More

2005 2.0L Ford Focus Saleen Speedlab AFTERMARKET NITROUS KIT INSTALLATION MANUAL

Filed Under (Ford) by admin on 29-01-2014

Download The 2.3-Liter Focus Nitrous Kit contains everything you need to bring your 2003 ½ through 2004 Focus from a stock car to a performance vehicle with full nitrous capabilities. This manual contains all the basic instructions for installing the kit and some helpful advice to ensure safe nitrous use. Please be advised that installing this kit will void any and all Ford powertrain warranties for the vehicle. Obtain the following parts: 05-1904-B09710* SALEEN NITROUS KIT 2005 FOCUS 1 05-1602-C08045 BRACKET N2O SOLENOID 1 00-9001-C00225* Installation Instructions 1. Using the standard Ford stereo removal tool, remove the stereo. 2. Unscrew A/C controls, take out ashtray, disconnect wiring harnesses, and set trim piece aside. Note where each wiring harness goes. 3. Measure 1 5/16″ down from the top of the audio unit trim, and 1 1/8″ in from the driver side of the trim. Drill a hole 3/4″ in diameter for nitrous switch.… Read More

INSTALLATION INSTRUCTIONS FOR PART 99-5812

Filed Under (Ford) by admin on 31-12-2013

DOWNLOAD APPLICATIONS FORD Edge 2007-2010 / Expedition 2007-2010 Explorer 2006-2010 / Explorer Sport Trac 2006-2010 F-150 2004-2008 / E Series 2009-10 / F Series 2005-2009 Five-Hundred 2005-2007 / Focus 2005-2007 / FreeStar 2004-2007 Freestyle 2005-2007 / Fusion 2006-2011 Mustang 2005-2009 / Super Duty 2008-2011 Taurus 2008 / Taurus X 2008-2009 MERCURY Monterey 2004-2007 / Milan 2006-2008 Montego 2005-2007 / Mountaineer 2006-2010 Sable 2008-2009 LINCOLN Mark LT 2005-2008. WIRING AND ANTENNA CONNECTIONS (Sold Separately) Harness: • 70-5520 – Ford Harness 2003-up • 70-5521 – Ford Amplified Harness 2003-up • 70-5522 – Ford Sub Harness 2003-up • XSVI-5520 NAV – Ford Interface 2006-up Antenna Adapter: • 40-CR10 – Chrysler/GM Antenna Adapter 2002-up. DASH DISASSEMBLY FORD F-150 2004-2008 LINCOLN MARK LT 2005-2008 FORD EXPEDITION 2007-2010 FORD EDGE 2007-2010. 1 Disconnect the negative battery terminal to prevent an accidental short circuit. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A) Remove (4) 9/32″ screws to remove the factory radio.… Read More

2007 Ford Focus Accessories List Guide

Filed Under (Ford) by admin on 01-01-2014

Download “Mobile-ease™” Hands Free System Connector Wiring Harness Required for Installation of “Mobile-ease™” Hands Free System 3W4Z-14A411-AA 2005-2007 Hands Free System Requires Connector Harness 14A411 for Installation3W4Z-19G399-AA2005-2007 “Street Appearance Package” ZX3/ZX5 Includes Front & Rear Bumper Fascia & Chromed Exhaust Tip, Primed 6S4Z-6120049-AA 2006-2007 ZX4 Includes Front & Rear Bumper Fascia & Chromed Exhaust Tip, Primed 6S4Z-5420049-BA 2006-2007 Bug Shield Styled Smoke-Color (Single-Pack) 5S4Z-16C900-A 2005-2007 Cargo Area Protector 3-Door/5-Door Black 1M5Z-6111600-AA 2001-2007 Sedan Black 1M5Z-5411600-DA 2001-2007 Wagon Black 1M5Z-7411600-CA 2001-2007 Cargo Logic System Without Logo Sedan, Heathered Black Ink (00) 3M5Z-5411600-AA 2003-2007 3-Door Hatchback, Heathered Black Ink (00) 3M5Z-6111600-AA 2003-2007 Wagon, Heathered Pebble (65) 3M5Z-7411600-AA 2003-2007 Wagon, Heathered Flint (64) 3M5Z-7411600-BA 2003-2007 Wagon, Heathered Black Ink (00) 3M5Z-7411600-CA 2003-2007 Cargo Net, Retention 4-Door/Wagon Envelope Style YS4Z-54550A66-AA 2000-2007 Cargo Organizer 3-Door/5-Door/Sedan Black, For Use Without Subwoofer 5M5Z-54115A00-AAA 2005-2007 Cargo Organizer, Interior Wagon Black, With Ford Logo F8CZ-54115A00-BAA 2000-2007 Cargo Security Shade For Wagon, Med.… Read More

2000-UP FORD FOCUS ZETEC PERFORMER EFI SERIES NITROUS SYSTEM

Filed Under (Ford) by admin on 01-01-2014

Download EDELBROCK NITROUS SYSTEMS 2000 & LATER FORD FOCUS ZETEC PERFORMER EFI SERIES NITROUS SYSTEM Part Number 70408 INSTALLATION AND OPERATION INSTRUCTIONS. Nitrous Bottle Installation After you have determined the location and orientation of the nitrous bottle, use the procedure to install the bottle: Street Car Installations 1. Disconnect vehicle’s battery. 2. Determine the location of the bottle within the confines of the rear of the vehicle. 3. Once a mounting location has been determined, raise the vehicle (f safety practices involved in working on a vehicle from under the vehicle) and verify fuel tank(s), brake lines, emissions equipment, or structural members in the way of potential mounting bolt locations. : It may be necessary to remove the fuel tank depending on the location 4. Install the rubber insulators within the bottle brackets. 5. Slip bottle into the mounting brackets. 6. Using the mounting bracket bolt holes as templates, mark an area for each of the brackets with chalk, metal marking pen, scribe, or marking pen to locate the bolt 7.… Read More

2005-2007 Ford Focus BX2184 Installation Instructions

Filed Under (Ford) by admin on 27-03-2014

Download 1. Remove three Phillips pushpins from radiator cover and lift to remove. Set pushpins and radiator cover aside to be reinstalled later. 2. Using the 10mm socket, remove one metric bolt from upper grill assembly. Do this to both sides of the vehicle. Lift assembly to remove. Set bolts and grille assembly aside to be reinstalled later. 3. Remove one push pin from top of fascia on each side of hood latch. Set pushpins aside to be reinstalled later. 5. Remove one Phillips screw from edge of fascia, just inside wheel well. Do this to both sides of the vehicle. Set screws aside to be reinstalled later. (Some models may have this.) 6. Using the 7mm socket, remove three metric bolts from the bottom corner of fascia – two silver (see white arrows) and one black (see grey arrow). Do this to both sides of the vehicle. Set bolts aside to be reinstalled later.… Read More

2000-2004 Ford Focus Engine Torque Damper Installation Instructions for 93028

Filed Under (Ford) by admin on 19-02-2014

Download Estimated Installation Time: One Hour Technical Rating: Easy Kit Includes: Tools Required: (1) Stiffy™ Engine Torque Damper Metric and/or SAE Socket Set (1) Engine Mounting Bracket Metric and/or SAE Open/Closed Wrench Set (1) Chassis Mounting Bracket Specific sizes 18 mm/17 mm/ 15 mm/ 10 mm (1) Hardware Kit Floor Jack and Jack Stands Installation: 1. Support the motor from underneath the passenger side. Make sure to use wood or rubber blocks to distribute the load of the engines weight on the jack. 2. Locate and remove the coolant overflow tank. This tank is removed using a 10 mm socket and a large flathead screwdriver. Be cautious not to damage clip on the coolant overflow tank. 3. Locate and remove the two (18 mm socket) M12 hex head motor mount nuts, shown in Illustration 1 . As you remove these nuts watch for movement in the engine, if you see movement STOP and recheck that the motor is supported.… Read More

2005-2009 Ford Focus WHITE FLAKES COMING FROM A/C VENTS

Filed Under (Ford) by admin on 09-12-2013

Download FORD: 2007-2009 MKX 2005-2009 Focus 2008-2010 Crown Victoria MERCURY: 2000-2005 Expedition, F-150 2008-2010 Grand Marquis, Mariner Hybrid, 2007-2009 Edge Mariner 2008-2010 Escape Hybrid, Escape LINCOLN: 2008-2010 Town Car 2000-2005 Navigator. This article supersedes TSB 9-19-16 to update the Using compressed air (maximum inlet pressure) 100 Service Procedure. PSI (689 kPa), clean the A/C ducts through the registers and blow off the evaporator core through ISSUE the blower motor opening. Some vehicles may experience white flakes coming NOTE from the A/C vents when the blower motor is THE ENTIRE EVAPORATOR CORE SURFACE engaged. This may be caused by flux utilized in the MUST BE DRY FOR BEST RESULTS. manufacturing process of the evaporator core. NOTE ACTION WHILE PERFORMING THIS PROCEDURE AND Follow the Service Procedure steps to correct the SELECTING DIFFERENT VENT MODES SUCH AS condition. FLOOR / PANEL AND FLOOR / DEFROST, IT SERVICE PROCEDURE MAY BE NECESSARY TO TEMPORARILY START THE ENGINE TO ENABLE MODE DOOR Hazard and Risk Warnings for White Flakes MOVEMENT.… Read More

You might also likeclose