2004 ford explorer wrench warning light

You search Auto repair manual PDF about 2004 ford explorer wrench warning light, search results will appear below. If search results do not exist, please search by others keyword.

1998 – 2001 Ford Explorer 4WD Ford Ranger Explorer Sport Trac / Edge Mountaineer 4WD Torsion bar key front leveling kit

Filed Under (Ford) by admin on 15-02-2014

  Download 1998 – 2001 Ford Explorer 4WD Ford Ranger Explorer Sport Trac / Edge Mountaineer 4WD Torsion bar key front leveling kit

Download Part # 22907 1998 – 2001 Ford Explorer 4WD 1998 – 2007 Ford Ranger / Explorer Sport Trac Edge / Mountaineer 4WD Torsion bar key front leveling kit Part# Description Qty. 22907-01 Torsion bar keys 2 22907INST Instruction manual (customer copy) 1 22907INST Instruction manual (installer copy) 1 WARNINGDECAL Warning decal 1 MIRRORHANGER Rear view mirror hanger 1. Important customer information: Tuff Country EZ-Ride Suspension highly recommends that a qualified and/or certified mechanic performs this installation. If you desire to return your vehicle to stock, it is the customers responsibility to save all stock hardware. This vehicles reaction and handling characteristics may differ from standard cars and/or trucks. Modifications to improve and/or enhance off road performance may raise the intended center of gravity. Extreme caution must be utilized when encountering driving conditions which may cause vehicle imbalance or loss of control. DRIVE SAFELY! Avoid abrupt maneuvers, such as sudden sharp turns which could cause a roll over, resulting in serious injury or death.… Read More

  Download 1998 – 2001 Ford Explorer 4WD Ford Ranger Explorer Sport Trac / Edge Mountaineer 4WD Torsion bar key front leveling kit

2004 Ford Truck Explorer ERRATIC FUEL GAUGE OPERATION

Filed Under (Ford) by admin on 27-12-2013

  Download 2004 Ford Truck Explorer ERRATIC FUEL GAUGE OPERATION

Download 2004 Ford Truck Explorer 4WD V8-4.6L SOHC VIN W MIL ON WITH DTC P0463 OR ERRATIC FUEL GAUGE OPERATION FORD: 2004-2007 Explorer MERCURY: 2004-2007 Mountaineer This article supersedes TSB 06-16-7 to update the Service Procedure. ISSUE Some 2004-2007 Explorer 4dr/Mountaineer vehicles may exhibit the malfunction indicator lamp (MIL) on with diagnostic trouble code (DTC) P0463 or an erratic fuel gauge concern. This could be from sulphur contamination in the fuel, causing an open or high resistance on the fuel sender card. ACTION Follow the Service Procedure steps to correct the condition. SERVICE PROCEDURE 1. For vehicles with customer symptom of erratic fuel gauge operation (with no MIL on), proceed to Step 1a. For vehicles with a customer symptom including the MIL on, proceed to Step 1b. If unable to verify the concern, do not continue with this TSB. a. Follow the appropriate pinpoint test (PPT) for “Fuel Gauge Inaccurate” in Workshop Manual (WSM), Section 413-01.… Read More

  Download 2004 Ford Truck Explorer ERRATIC FUEL GAUGE OPERATION

2009 HONDA CIVIC 4 DOOR FOG LIGHTS INSTALLATION INSTRUCTIONS

Filed Under (Honda) by admin on 09-12-2013

  Download 2009 HONDA CIVIC 4 DOOR FOG LIGHTS INSTALLATION INSTRUCTIONS

Download PARTS LIST Right fog light Left fog light Switch harness Fog light harness Sub harness Combination light switch 6Wire ties Clip 2 Self-tapping screws 20 A Fuse (Some may not used.) Relay Ground bolt 2 Spring nuts TOOLS AND SUPPLIES REQUIRED Phillips screwdriver Flat-tip screwdriver Ratchet 10 mm and 12 mm Sockets Blanket Diagonal cutters 5 mm Hex wrench Illustration of Fog Lights installed on the vehicle INSTALLATION 1. Make sure you have the anti-theft codes for the audio system and navigation system (if equipped), then write down the radio presets. 2. Disconnect the negative cable from the battery. 3. Remove the front bulkhead cover (two expansion clips, three clips, and move the right and left fender trims inward). 4. With the help of an assistant, remove the front bumper (four long clips, four center clips, two socket bolts, and two self-tapping screws). To prevent damage, set the front bumper on a blanket.… Read More

  Download 2009 HONDA CIVIC 4 DOOR FOG LIGHTS INSTALLATION INSTRUCTIONS

2000-2004 Ford Focus ZX3 SVT Suspension Kit INSTALLATION INSTRUCTIONS

Filed Under (Ford) by admin on 17-03-2013

  Download 2000-2004 Ford Focus ZX3 SVT Suspension Kit INSTALLATION INSTRUCTIONS

DownloadPARTS IN KIT: ITEM # QTY DESCRIPTION SERVICE PART # REPLACEMENT SOURCE 1 2 Spring, rear 2M5Z-5B669-AA Ford Dealer 2 2 Shock, rear 2M5Z-18125-BA Ford Dealer 3 1 Anti-roll bar, rear 1S4Z-5A772-BA Ford Dealer 4 1 Strut, RF 2M5Z-18124-BA Ford Dealer 5 1 Strut, LF 2M5Z-18124-BB Ford Dealer 6 2 Bump stop 2M5Z-3020-AA Ford Dealer 7 2 Spring, front 2M5Z-5310-AA Ford Dealer 8 2 Nut, upper strut piston W700212-S3091 Ford Dealer. TORQUE SPECIFICATIONS: FASTENER TORQUE (ft./lbs.) (EXCEPT WHERE NOTED) Rear shock upper mount nut 13 Rear shock lower mount nut 85 Rear lower control arm to knuckle 85 Rear anti-roll bar to control arm bolts 11 Rear anti-roll bar bushing clamp bolts 35 Upper strut piston nut 35 Strut tower nuts 18 Knuckle to strut bolt 66 Front anti-roll bar link to strut bolt 94 Caliper to Knuckle 21 Wheel nuts 37. REAR SUSPENSION INSTALLATION INSTRUCTIONS: STEP 1: Raise vehicle off ground and support with jack stands.… Read More

  Download 2000-2004 Ford Focus ZX3 SVT Suspension Kit INSTALLATION INSTRUCTIONS

2004-2006 Ford Double DIN Installation Kit PART 95-5812 INSTALLATION INSTRUCTIONS

Filed Under (Ford) by admin on 09-12-2013

  Download 2004-2006 Ford Double DIN Installation Kit PART 95-5812 INSTALLATION INSTRUCTIONS

Download FORD Edge 2007-2009 / Expedition 2007-2009 Explorer 2006-2009 / Explorer Sport Trac 2006-2009 F-150 2004-2008 / F Series 2005-2008 Five-Hundred 2005-2007 / Focus 2005-2007 / FreeStar 2004-2007 Freestyle 2005-2007 / Fusion 2006-2009 Mustang 2005-2009 / Super Duty 2008-2009 Taurus 2008-2009 / Taurus X 2008-2009 MERCURY Monterey 2004-2007 / Milan 2006-2008 Montego 2005-2007 / Mountaineer 2006-2009 Sable 2008-2009 LINCOLN Mark LT 2005-2009 Factory Navigation Only: MKX 2007-2009 / Navigator 2007-2009. DASH DISASSEMBLY A B C D E FORD MUSTANG 2005-2009 Remove the small rectangular shifter lever trim panel if equipped . (Figure A) 2 Remove (4) 9/32″screws from the radio to remove. (Figure E) 7 Remove (2) Phillips screws from under the center armrest at the back of the shifter trim panel (includingcup holders). (Figure B) 3 Unclip and remove panel. (Figure B) 4 Unclip and remove the (2) center stack trim panels from the left and right side of the radio and climate controls.… Read More

  Download 2004-2006 Ford Double DIN Installation Kit PART 95-5812 INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS FOR PART 99-5812

Filed Under (Ford) by admin on 31-12-2013

  Download INSTALLATION INSTRUCTIONS FOR PART 99-5812

DOWNLOAD APPLICATIONS FORD Edge 2007-2010 / Expedition 2007-2010 Explorer 2006-2010 / Explorer Sport Trac 2006-2010 F-150 2004-2008 / E Series 2009-10 / F Series 2005-2009 Five-Hundred 2005-2007 / Focus 2005-2007 / FreeStar 2004-2007 Freestyle 2005-2007 / Fusion 2006-2011 Mustang 2005-2009 / Super Duty 2008-2011 Taurus 2008 / Taurus X 2008-2009 MERCURY Monterey 2004-2007 / Milan 2006-2008 Montego 2005-2007 / Mountaineer 2006-2010 Sable 2008-2009 LINCOLN Mark LT 2005-2008. WIRING AND ANTENNA CONNECTIONS (Sold Separately) Harness: • 70-5520 – Ford Harness 2003-up • 70-5521 – Ford Amplified Harness 2003-up • 70-5522 – Ford Sub Harness 2003-up • XSVI-5520 NAV – Ford Interface 2006-up Antenna Adapter: • 40-CR10 – Chrysler/GM Antenna Adapter 2002-up. DASH DISASSEMBLY FORD F-150 2004-2008 LINCOLN MARK LT 2005-2008 FORD EXPEDITION 2007-2010 FORD EDGE 2007-2010. 1 Disconnect the negative battery terminal to prevent an accidental short circuit. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A) Remove (4) 9/32″ screws to remove the factory radio.… Read More

  Download INSTALLATION INSTRUCTIONS FOR PART 99-5812

2009 Ford F150 2″ Leveling Kit Installation Instructions

Filed Under (Ford) by admin on 09-12-2012

  Download 2009 Ford F150 2″ Leveling Kit Installation Instructions

Download NOTICE TO DEALER AND VEHICLE OWNER Any vehicle equipped with any Rough Country product should have a “Warning to Driver” decal installed on the inside of the windshield or on the vehicle’s dash. The decal should act as a constant reminder for whoever is operating the vehicle of its unique handling characteristics. INSTALLING DEALER – it is your responsibility to install the warning decal and forward these installation instructions on to the vehicle owner for review. These instructions should be kept in the vehicle for its service Kit Contents: 4-Upper Strut Spacers 2 Lower Strut Spacers 1-Poly Bag: 6-3/8″ x 2.25″ Bolt 6-3/8″ Lock-washers 6-3/8″ Nuts Tools Needed: 15mm Wrench 15mm Socket 29mm Socket 1 1/16″ Wrench 21mm Wrench 16 mm Wrench 21 mm Wrench 3/8″ mm Wrench 9/16″ Wrench Hammer Floor Jack Jack Stands Torque Specs: Size Grade 5 Grade 8 3/8″ 30 ft/lbs 35 ft/lbs 7/16″ 45 ft/lbs 60 ft/lbs 1/2″ 65 ft/lbs 90 ft/lbs 9/16″ 95 ft/lbs 130 ft/lbs 5/8″ 135 ft/lbs 175 ft/lbs 3/4″ 185 ft/lbs 280 ft/lbs Class 8.8 Class 10.9 12MM 55ft/lbs 75ft/lbs 14MM 85ft/lbs 120ft/lbs 16MM 130ft/lbs 165ft/lbs 18MM 170ft/lbs 240ft/lbs.… Read More

  Download 2009 Ford F150 2″ Leveling Kit Installation Instructions

1995-1997 FORD EXPLORER TRANSFER CASE BINDING OR SHUDDER DIAGNOSTICS

Filed Under (Ford) by admin on 12-02-2014

  Download 1995-1997 FORD EXPLORER TRANSFER CASE BINDING OR SHUDDER DIAGNOSTICS

Download FORD: 1995-1997 EXPLORER 2. Connect the New Generation Star (NGS) Tester ISSUE to the Data Link Connector (DLC) underneath The diagnostic procedure for binding or shudder the steering wheel. Monitor for any Diagnostic from transfer case in slow, tight turns while in 4 Trouble Codes (DTCs) set by the transfer case Auto mode may be inaccurate for some vehicles. that could indicate incorrect speed sensor function. Codes could include, but are not ACTION limited to: Diagnose transfer case binding or shudder concerns using the following Diagnostic Procedure. •P1836 – Front propshaft sensor circuit failure •P1837 – Rear propshaft sensor circuit failure DIAGNOSTIC PROCEDURE •P1874 – Hall effect sensor power short circuit to battery 1997 EXPLORER •P1875 – Hall effect sensor power circuit 1. Test drive the vehicle in 4 Auto, 4 High and 4 failure Low. Evaluate the vehicle in each of these NOTE modes. The vehicle should bind in turns in both ADDITIONAL CODES COULD BE SET AS WELL.… Read More

  Download 1995-1997 FORD EXPLORER TRANSFER CASE BINDING OR SHUDDER DIAGNOSTICS

Ford Contour QuickLIFT Installation Instructions Guide

Filed Under (Ford) by admin on 26-02-2014

  Download Ford Contour QuickLIFT Installation Instructions Guide

Download Step 1 – Unpack QuickLIFT kit and verify contents. Remove all items from the packing tube. You should have the following before beginning: * [Group 1 - Fender ] (2) shorter fender Ball-studs & (4) washers with (2) nuts. * [Group 2 - Hood ] (2) Ball-studs with 12 mm fitting & (2) washers. * [Group 3 - Gas Springs] (4) Locking clips * (2) QuickLIFT Gas Springs * Printed Instructions. Step 2 – Gather required tools. Please gather the following tools before you begin the installation: * Power Drill * 5/16 drill bit. * 1/2″ open ended wrench. * 1/2″ deep well socket. * 12 mm open ended wrench or socket wrench. * 10 mm open ended wrench or socket wrench. * Fine permanent marker * Center punch & hammer – optional. Step 3 – Move coolant reservoir. Please gather the following tools before you begin the installation: * Power Drill * 5/16 drill bit.… Read More

  Download Ford Contour QuickLIFT Installation Instructions Guide

1999-2000 Ford Windstar The battery light is on, but the alternator is charging Has a code P1246

Filed Under (Ford) by admin on 18-01-2014

  Download 1999-2000 Ford Windstar The battery light is on, but the alternator is charging Has a code P1246

Download Direct-Hit 2000 Ford Windstar 3.8L Test Details Hotline Archive # 124501 Confirmed Fix Vehicle Application: 1999 Ford Windstar 3.8L, Vin 4 2003 Ford Windstar 3.8L 2000 Ford Windstar 3.8L, Vin 4 Customer Concern: The battery light is on, but the alternator is charging. Has a code P1246. Tests/Procedures: 1. Disconnect the alternator and the Powertrain Control Module (PCM). Check the Violet (VT) (GENerator MONitor or GENMON) wire from the alternator to pin 20 of the PCM connector and the Red/Pink (RD/PK) (GENerator COMmand or GENCOM) wire from the alternator to pin 45 of the PCM for high resistance, an open, or a short to ground. Repair the wiring as needed. 2. If the wiring checks OK, reconnect the PCM and alternator. Start the engine and monitor the VT wire for a roughly 0-10v square wave signal. The signal will be around 40-50% normally with no loads on the system and minimal charging system output.… Read More

  Download 1999-2000 Ford Windstar The battery light is on, but the alternator is charging Has a code P1246

You might also likeclose