1996 Audi/Volkswagen Bose Integration Harness

Download 1996-Up Audi / Volkswagen Bose Integration Harness For models amplified without Bose: 1996-03 Audi A4 / 1996-03 Audi A6 2000-01 Audi S4 / 2002-03 Audi S6 Use the White, White/Black, Gray, and Gray/Black speaker wire for the front speaker output and use the Green and Purple RCA’s for the rear speaker outputs. Be sure to connect the Blue/White wire to the aftermarket radio’s amp turn-on wire. The White and Gray RCA’s will not be used. For models amplified with Bose: 1996-03 Audi A4 / 1996-03 Audi A6 1997-03 Audi A8 / 2000-01 Audi S4 2002-03 Audi S6 / 2001-03 Audi S8 2000-03 Audi TT Use the White and Gray RCA’s for the front speaker output and use the Green and Purple RCA’s for the rear speaker outputs. Be sure to connect the Blue/White wire to the aftermarket radio’s amp turn-on wire. The White, White/Black, Gray, and Gray/Black speaker wires will not be used.… Read More

1996-2001 Audi A4 Quattro Part 57- 0515 INSTALLATION INSTRUCTIONS

Download Audi A4 2.4/2.8L V6 1995-2001 Audi A4 Quattro 2.8L V6 1996-2001 Audi A6 2.4/2.8L V6 1997-2002 Audi A6 Quattro 2.8L V6 1997-2001 1. Remove the cover from the air box assembly. (Fig. 1) 2. Unclip the electrical connector from the Mass Air Sensor (MAS). (Fig. 2) 3. Unclip and remove the intake hose from the MAS. (Fig. 3) 4. Unclip the evap control valve from the air box. (Fig. 4) 5. Unclip the wiring from the air box (Fig. 5) 6. Unbolt the air box mounting bolt. (Fig. 6) 7. Disconnect the auxiliary air pump hose from the front of the air box. (Under the intake scoop) 8. Carefully lift and remove the complete air box assembly from the vehicle. (Fig. 7) 9. Unbolt and remove the MAS from the air box. (Fig. 8) 10. Fit the MAS adaptor to the MAS using the hardware provided. (Fig. 9) 11. Refit the MAS to the intake hose using the original hose clip.… Read More

2000-2003 AUDI A6 QUATTRO BRACKETRON PHONE MOUNT

Download AUDI A4, S4, QUATTRO (2000-2002) AUDI A6 QUATTRO (2000-2003) AUDI ALLROAD QUATTRO (2001-2003). NOTE: READ INSTRUCTIONS COMPLETELY BEFORE INSTALLING THIS BRACKETRON PHONE MOUNT . All phone mount instructions are written from the drivers seat position looking forward at the vehicle dash. We advise caution whenever your removing or handling plastic parts of a vehicles dash. WARNING: Unnecessary force or pressure can cause pieces to crack or break.TOOLS NEEDED: Two (2) sets of Audi DIN Radio Removal Tools, (Btron Part # SIT-102 One (1) Flat Headed Screwdriver or Dash Trim Tool (Btron Part # SIT-104), 5/16″ socket and driver . PARTS INCLUDED: One phone mount and instructions. LOCATION OF MOUNT: To the Right of the Radio. Installation Instructions 1. Locate four slots on the face of the radio. Insert four Audi DIN tools in these four slots until you hear or feel the tools click or lock. Note: There is a rubber seal that wraps around the radio between the radio and the dash pad.… Read More

2002 Ford Escort Cooling System Draining, Filling and Bleeding Workshop Manual

Download Draining 1. Bring the engine to normal operating temperature and turn the engine off. With the cooling system under pressure, inspect cooling system hoses and clamped hose connections for leaks, excessive deterioration or contact wear. Inspect radiator installation retention. Note any discrepancies and proceed. 2. WARNING: Never remove the pressure relief cap while the engine is operating or when the cooling system is hot. Failure to follow these instructions can result in damage to the cooling system or engine or personal injury. To avoid having scalding hot coolant or steam blow out of the degas bottle when removing the pressure relief cap, wait until the engine has cooled, then wrap a thick cloth around the pressure relief cap and turn it slowly. Step back while the pressure is released from the cooling system. When you are sure all the pressure has been released, (still with a cloth) turn and remove the pressure relief cap.… Read More

2001 Lincoln LS Workshop Manual

Download Cooling System Draining, Filling and Bleeding. Draining WARNING: Never remove the pressure relief cap while the engine is operating or when the cooling system is hot. Failure to follow these instructions can result in damage to the cooling system or engine or personal injury. To avoid having scalding hot coolant or steam blow out of the degas bottle when removing the pressure relief cap, wait until the engine has cooled, then wrap a thick cloth around the pressure relief cap and turn it slowly. Step back while the pressure is released from the cooling system. When you are sure all the pressure has been released, (still with a cloth) turn and remove the pressure relief cap. CAUTION: The coolant must be recovered in a suitable, clean container for reuse. If the coolant is contaminated it must be recycled or disposed of correctly. CAUTION: Care must be taken to ensure the accessory drive belt does not become contaminated with engine coolant.… Read More

Audi A4 Bluetooth Hands Free Kit Installation Instruction

Download Audi A3 (8P) Sportback, Cabrio Audi A4 (8E) B6, B7 Audi A6 (4B)* Audi TT (8J) Roadster, Coupe´ Audi A4 (8K) Audi A5 (8T) Bluetooth Hands Free Kit Installation Instruction. Installation instruction – A3 (8P), A4 (8E), A6 (4B), TT Please remove the head unit using suitable tools, after removing disconnect the necessary wiring. With a plug & play connection you will complete the fitting of the hands free kit. Please see scheme below. Unlock the connection and put the delivered wiring between the head unit and the connector coming from the vehicle. Wire the loom for the interface connection towards the glove box. Find a suitable location for the interface box within the vehicle. Make sure you will reach the interface at any time (regarding to software updates). ATTENTION: Does the vehicle have airbags fitted along the A-column it is essential to wire the loom for the microphone BEHIND the airbag.… Read More

2000-2002 Audi Quattro StartupRacing Contest and Competition Suspension Installation Manual

Download B5 Audi Quattro (2000-2002 Audi S4 and 1996-2001 Audi A4). Suspension Removal General 1. Loose wheel bolts 2. Raise the car and support it with two or four jack stands (if only using two, support front first, then rear) 3. Remove wheels Front 1. Remove the bolt that attaches the shock clevis to the control arm. (18mm and 19mm) 2. Remove upper control arm bolt (16mm) 3. Disconnect the upper control arms from the upright (WD40 helps here) 4. Open the hood, and remove the plastic piece hiding the battery, along with the pollen filter cover (8mm) 5. Remove these three identical bolts. They hold the upper control arm plate, as you remove the last bolt, make sure you hold the shock body as it will be loose. (16mm) Remember the orientation of washers as you remove them. 6. Remove the OEM shock along with the spring, and place on a clean flat surface.… Read More

2001 Audi TT Roadster Digital Media Player Installation Instructions

Download Step#01 Remove contents from trunk. Remove bottom trunk liner. Place in clean area. Step#02 Remove parcel storage shelf to access CD changerharness. This is done by removing two plastic trim fasteners. Note: The single-use retention plastic pin maybreak, have extra ones available to replace it. Step#03 Locate the factoryCD changerharness plug in the cavity. If there is no CD changer, the harness plug would be bare with a protective cover. If it is connected to a CD changer, unplug the factoryCD changerharness from the CD changer plug. Step#04 Connect the PhatBox jumperharness to the factoryCD changerharness. Caution! PhatBox should not be connected when performing this task. Step#05 Run the jumperharness plug forthe PhatBox through the ventilation holes in the top of the trunk storage tray. Pass enough cable through to complete the installation. Loop excess, and zip tie. Step#06 Appendix Ais a template foruse in locating the holes to attach the PhatNoise brackets.… Read More

1997-2001 Audi A4 1.8T Carbonio Intake System

Download Step 1: Using a Phillips head (star) screwdriver remove the 2 screws holding the factory air inlet scoop. The location of these screws is marked with arrows right. Once these screws are out, the entire inlet scoop can be pulled out. At this time also pull off the plastic cover that is on top of the airbox. There are no fasteners holding it in place. Set the forward most portion of the scoop aside for later. Step 2: Using a 10mm wrench remove the bolt that attaches the airbox to the passenger side inner fender. SAVE THIS BOLT FOR LATER. Step 3 (2000-2001 Cars Only): Leading to the side of the factory airbox is a corrugated hose. Disconnect this hose by pulling it off of the airbox. Make sure that the rubber ring remains on the inside of the hose end. Step 4 (1997-1999 Cars Only): On top of the airbox is an oval shaped sensor with 2 wires leading to it.… Read More