1994 Mercury Cougar XR7 INTERIOR FUSE PANEL IDENTIFICATION

Download 1994 Mercury Cougar XR7 FUSES & CIRCUIT BREAKERS 1989-95 FUSES & CIRCUIT BREAKERS Ford Motor Co. INTERIOR FUSE PANEL IDENTIFICATION (1994-95 MODELS) On all models, the fuse panel is located under the instrument panel, left of the steering column. Fuse & Circuit Breaker Identification 1 – 10 Amp Panel Dimmer, Parking/License Lights, Autoshock Module, Clock 2 – 10 Amp Air Bag Module 3 – 5 Amp Foglight Switch 4 – 10 Amp A/C Clutch 5 – 15 Amp HEGO 1 & 2 (V6 Only) 6 – 10 Amp Anti-Theft, Trunk, Map, Vanity, Glove Box, Underhood, L/H Instrument Panel, Rear Courtesy, Door Courtesy, Lock Cylinder & Dome Lights, Power Mirrors 7 – 10 Amp Turn Signal Indicators/Lights, Backup Lights 8 – 5 Amp Cluster, Rear Defrost Switch, Coolant/Wash Level Sensor, DRL Module, EVO Test, EVO Steering Sensor, ARC (EVO) Module, ARC Switch, Hard Relay, Soft Relay, Auto Mirror, EATC Blend Door, Airbag Module, Overdrive Cancel Switch, Brakeshift Solenoid 9 – 10 Amp Main ABS Relay, ABS Module 10 – 10 Amp OBD-II Test Connector 11 – Not Used 12 – 5 Amp Illumination Of: Cluster, Phone Switch, Rear Defrost Switch, A/C Switch (Manual), PRNDL Indicator, Ashtray, EATC, Clock, Radio 13 – 20 Amp Cigarette Lighter, Flash-To-Pass 14 – 15 Amp Speed Control Module, ABS Module, BrakeShift Interlock, High Mount Brakelight, Brakelights, Flashers 15 – 5 Amp Cluster (Gauges), Cluster (ABS & Airbag Warning), Warning Chime, Autolight Sensor 16 – 10 Amp Integrated Module, Sport Voltmeter, Speed Control, Remote Keyless Entry, Anti-Theft, Power Window/Door Lock Switch Illumination, Radio, CD Changer, Power Antenna, Clock 17 – 30 Amp Wiper/Washer System 18 – 20 Amp Power Door Locks, Decklid Release, Fuel Door Release, Power Seats, Power Lumbar, Booster 19 – 20 Amp Power Window Motors, Moon Roof Motor UNDERHOOD FUSE PANEL IDENTIFICATION (1994 MODELS) The “high-current” fuse panel is located in the engine compartment on the L/H fender apron.… Read More

1994-2001 Acura Integra Edelbrock Intercooler Kits Installation Instructions

Download
DESCRIPTION: These high-efficiency intercoolers feature a bar and plate core with cast aluminum end tanks. Intercooler #15009 is designed for 1996-2000 Honda Civics, while #15036 is for 1992-1995 Honda Civics, and #15037 is designed for 1994-2001 Acura Integras. Modification of the stock bumper cover is required, aftermarket bumper covers may or may not need modification. Intercooler #15009 features a 22″long, 6″wide, 2.5″ thick core, while #15036 &15037 feature a 22″long, 5.5″wide, and 2.5″thick core. Hose connections for all intercoolers are 2.5″diameter.
INSTALLATION PROCEDURE
1. Installation of the intercooler requires removal of the front bumper cover. Follow your factory service manual for removal and reinstallation of the bumper cover. 2. For 1996-2000 Civic, remove the bolt holding the horn onto the center radiator support and move the horn to the side. On 1992- 1995 Civic and 1994-2001 Integra, the horn may need to be moved from it’s stock location. If necessary, drill and mount the horn using hardware of your choosing.… Read More

1994-2001 Acura Integra Part EGJ1 HASPORT PERFORMANCE

Download Part Number EGJ1 for J-series V6 engines into 1992-1995 Honda Civic, 1994-1997 Del Sol And 1994-2001 Acura Integra. Things you should know about this swap The following is a list of information you should know before performing this swap. Please visit www.hasport.com for the latest information on this swap. 1. Ground and hood clearance – The J-series engine is a tall engine. It is much taller than the H22 and K-series engines. Hasport engine mounts are designed to hold the engine with the same ground clearance you would find on a K-series engine swapped vehicle. The engine sticks up several inches above the hood line. A custom or modified hood is needed. 2. Hasport does not make a conversion engine harness for the swap. 3. Power Steering – The Civic or Integra power steering hose will not work with the J-series power steering pump. Just like with K-series swaps, new power steering hoses need to be made and the reservoir will need to be relocated.… Read More

1994 Audi S4 Rear Differential – Right and Left Side Seal

Download The following describes the procedure I used to remove and replace the right and left side rear differential seals on my 1994 Audi S4. This procedure should apply to the 1992 – 1994 S4 and the 1995-1997 S6 (the left seal process may be different on the ’96-’97 cars) and should be used in conjunction with the Bentley Repair Manual. Right Side Seal 1. Jack up the right rear of the car and support solidly on jackstands. The higher you jack the car, the better the access and the less likely oil will be lost when you remove the seal. 2. Remove the plastic gravel tray (four 13 mm bolts/nuts). 3. It is not necessary to drain the differential oil. When the axle flange and seal are removed, a small amount of oil may drain out. This can be caught in a drain pan. If you do decide to drain the differential oil, remove the fill plug BEFORE removing the drain plugs.… Read More

1994 Chevy Truck C 1500 Ignition – Timing Connector Location Change

Download 1994 Chevy Truck C 1500 Truck 2WD V6-262 4.3L VIN Z Vehicle Level Maintenance Tune-up and Engine Performance Checks Ignition Timing Technical Service Bulletins Ignition – Timing Connector Location Change. INFORMATION SUBJECT: TIMING CONNECTOR LOCATION CHANGE MODELS: 1994 CHEVROLET AND GMC C/K TRUCKS WITH GASOLINE ENGINES The timing connector, which can be disconnected to return engine timing to base for adjustment purposes, has been moved from the engine compartment to inside the cab. This new location is not currently reflected in the Service or Owner’s Manual. The new location is under the dash directly below the glove compartment. The tan/black wire is routed for a short distance outside of a large wiring harness. This large harness is routed between the heater blower motor and evaporator case. The timing connector is taped to the wire bundle (Figure 1).… Read More

1997 Buick Century COLD ENGINE TICK OR RATTLE AFTER START-UP

Download 1997 Buick Century Limited 3.1/3.4L ENG TICK OR RATTLE AFTER COLD START UP COLD ENGINE TICK OR RATTLE AFTER START-UP (REPLACE PISTON/PIN ASSEMBLY) Model(s): 1994-95 Buick Regal 1994-97 Buick Skylark 1994-98 Buick Century 1994-95 Chevrolet Beretta Corsica, Lumina, Monte Carlo 1996-98 Chevrolet Venture 1997-98 Chevrolet Malibu 1993-97 Oldsmobile Cutlass Supreme 1994-96 Oldsmobile Cutlass Ciera 1994-97 Oldsmobile Achieva 1996-98 Oldsmobile Silhouette 1997-98 Oldsmobile Cutlass 1994-98 Pontiac Grand Am, Grand Prix 1996-98 Pontiac Trans Sport with 3100, 3400 V6 Engine (VINs M, E – RPOs L82, LA1) CONDITION Some customers may comment on a ticking type noise that begins shortly after cold engine start-up and gradually diminishes as the engine warms up. In most cases, the noise is gone after five (5) minutes. In severe cases, the noise may not disappear when lhe engine is hot. CAUSE Under normal design tolerances when the piston pin bore is produced at the maximum tolerance and the piston pin is produced at the minimum tolerance (min-max tolerance) trace noise levels can occur.… Read More

1994-2001 Acura Integra GSR Whirlwind Intake Manifold

Download Acura GSR Whirlwind Intake Manifold Part No. 59002 (Polished) and 59003 (Satin) For use on 1994 – 2001 Acura Integra GSR 1.8L DOHC VTEC. Preparation for Installation – 1. Make sure that there are no metal chips or other debris inside the manifold. Check that all bolts will run freely into any tapped holes. 2. Note that while this manifold makes provision for all vacuum lines and other brackets or parts that attached to the stock manifold, the vacuum ports originally on the front side of the manifold have been moved to the back for a cleaner appearance. This will require the use of longer vacuum hoses in some cases. 3. Disconnect battery and drain coolant. 4. Mark and identify all hoses and valves. 5. Check the condition of all hoses, gaskets and o-rings. Replace as needed. Use a new intake gasket. Honda #17105-P72-004. Removal – 1. Relieve the fuel pressure in the system by loosening the banjo bolt on the top of the fuel filter.… Read More

1994-2001 Acura Integra LS/RS/GS Supercharger System

Download Acura Integra LS/RS/GS 1994-01 Part # 989-510 C.A.R.B. E.O. D-344-8 Supercharger System Installation Instructions. INSTALLATION INSTRUCTIONS 1. Important! Remove the negative battery cable. If you have coded alarm on your radio, retrieve the code before removing the negative cable. 2. Put your car on jack stands. NEVER WORK UNDER ACAR NOTSUPPORTED BYJACK- STANDS OR RAMPS!!!!!!!! !!!!!!!!!!! If possible, use a vehicle hoist / lift. 3. Drain the cooling system. You will be replacing some hoses and the intake manifold. Note: When draining the coolant, carefully blow compressed air through the top of the radiator while holding a shop towel over the top of the radiator and air-blowing device. This will purge a majority of coolant from the block, reducing the amount on while working under the car. 4. Remove the large diameter rubber hose between the air box and the throttle body. Remove the clamp that holds a double metal pipe assembly to the large diameter intake hose.… Read More

1994-2001 Acura Timing Belt Installation Procedure

Download 1.8LB18 Series Engines The AERATechnical Committee offers the following information regarding timing belt installation procedures on 1994-2001 Acura 1.8LB18 Series engines. Failure to follow these procedures could result in engine damage. 1. Position the crankshaft and the camshaft pulleys as shown in Figure 1 before installing the timing belt. a. Set the crankshaft so that the No. 1 piston is at top dead center (TDC). Align the groove on the teeth side of the timing belt drive to the “arrow mark” pointer on the oil pump. b. Align the TDC marks on intake and exhaust pulleys. 2. NOTE: To set the camshafts at TDC position for the No. 1 piston, align the holes in the camshafts with the holes in No. 1 camshaft holders and insert 5.0 mm pin punches in the holes. 3. Install the timing belt tightly in the sequence shown in Figure 2. 1) Timing belt drive pulley (crankshaft) 2) Adjusting pulley 3) Water pump pulley 4) Exhaust camshaft pulley 5) Intake camshaft pulley 4.… Read More

1994 Cadillac DeVille Concours Passive Struts

Download Subject: Procedure to Disable Illumination of Service Indicator AFTER the Installation of Passive Struts/Shocks Models: 1992-94 Buick Skylark 1993-96 Buick Park Avenue 1989-92 Cadillac Allante 1991-93 Cadillac Eldorado, Seville 1991-95 Cadillac DeVille 1991-95 Oldsmobile Ninety Eight 1992-93 Oldsmobile Achieva 1994-99 Pontiac Bonneville This bulletin is being revised to clarify when this bulletin may be used to turn the service suspension lamp off. Also, a step has been added to the 1991 Cadillac Eldorado and Seville repair. Please discard Corporate Bulletin Number 00-03-11-001 (Section 3 – Suspension). Refer to the Service Manual page 8D-13 (1989) or 8D-14 (1990-1992). On these vehicles, adjust the BCM Override value “BS08″. To do this, use the warmer/cooler button on the CCDIC to decrease the BCM override value “BS08″ which is displayed when you enter the system by two (2). When the desired number is displayed on the CCDIC, it must be stored by holding the “Elapsed Time” and “Fuel Used” buttons until the new value flashes on and off.… Read More