1994 buick lesabre brake line repair

You search Auto repair manual PDF about 1994 buick lesabre brake line repair, search results will appear below. If search results do not exist, please search by others keyword.

2004+ Acura TSX Rear Big Brake Kit Installation Instructions

Filed Under (Acura) by admin on 09-12-2013

Download Step 1 Raise Vehicle, and Remove Wheels Raise Vehicle, and Remove Wheels Raise Vehicle, and Remove Wheels Raise Vehicle, and Remove Wheels Raise Vehicle, and Remove Wheels For a rear kit installation, block the front wheels, and release the parking brake. Then break loose the lug nuts on both rear wheels before jacking up the car. Refer to the Owner’s Manual to identify the correct location of the jack for raising the vehicle. Jack up the vehicle, and secure it on a pair of jack stands, again referring to the Owner’s Manual for jack location joints. After securing the vehicle at a convenient height, remove the rear wheels. Step 2 Disconnect Stock Brake Line Loosen the hard line fitting from the stock brake line, using a 10mm flare wrench. Place a drip tray or several rags directly below the inboard brake line connection. If the area around the brake line connection to the chassis is dirty, clean it using brake cleaner or an appropriate cleaning agent.… Read More

1994 AUDI UrS4 Stainless Steel Brake Flex Line Installation

Filed Under (Audi) by admin on 05-04-2014

Download Rear Line Installation I started with the right rear line since this is first in the bleeding sequence. The rear line (see Photo 1) has one threaded female flare fitting (connects to steel brake line) and one threaded male fitting (connects to the caliper). Break both fittings loose on the line on the car. Also break loose the bleeder screw on the caliper before proceeding to avoid the embarrassment of getting the new line on and not being able to bleed it. The caliper connection should come loose easily but the connection to the steel line may give some trouble on rust belt cars. Use your favorite penetrating oil on both. I had to use the flame wrench on one of my connections. Front Line Installation The front flex lines have threaded female flare connections at both ends that connect to steel brakes lines – one from the master cylinder and the other from the caliper.… Read More

2003 Volvo S40 Replacing The Rear Brake Pads

Filed Under (Volvo) by admin on 29-12-2013

Download 2003 Volvo S40 L4-1.9L Turbo VIN 27 B4204T4 Vehicle Level Brakes and Traction Control Disc Brake System Brake Pad Service and Repair Rear Brake Pads. Replacing The Rear Brake Pads Special Tools: 999 5782, 951 2834 General CAUTION: Replace the brake pads when the minimum thickness is 2 mm . Removing the rear brake pads Remove * the hub cap and the wheel * the retaining clip and the brake hose from the support * the upper bolt from the locating pin for the brake caliper . Twist the brake caliper backwards. Remove the brake pads. NOTE: Do not depress the brake pedal while the brake pads are removed. Checking and cleaning the rear brake calipers. Clean brake pad contact surfaces in the brake caliper and on the caliper mounting. Check the dirt guard for the piston. Replace the dirt guard if it is worn. Recondition the brake caliper if the dirt guard is defective.… Read More

2007 Volkswagen Rabbit Brake pads, removing and installing

Filed Under (Volkswagen (VW)) by admin on 09-12-2013

Download 2007 Volkswagen Rabbit BRAKES Brake System. Brake pads, removing and installing Special tools, testers and auxiliary items required. Brake pads, removing When removing, mark brake pads that will be used again. Install in the same position, otherwise braking effect will be uneven! * Remove wheels. * Disconnect connector – 1 – for brake pad wear indicator. * Remove caps – arrows -. * Loosen both guide pins – arrows – and remove from brake caliper. * Remove brake caliper and secure with wire so that the weight of the brake caliper does not burden or damage the brake hose. * Remove brake pads from brake caliper. Cleaning: * Thoroughly clean contact surfaces for brake pads at brake carrier, remove corrosion. * Clean brake caliper. Use only appropriate solvents for cleaning brake caliper. Brake pads, installing Before pressing piston into cylinder using piston resetting tool, brake fluid must be extracted from brake fluid reservoir.… Read More

2004+ Acura TSX Front Axle Kit

Filed Under (Acura) by admin on 03-02-2014

Download Step 1 Raise Vehicle, and Remove Wheels For a front kit installation, apply the parking brake, then break loose the lug nuts on both front wheels before jacking up the car. Refer to the Owner’s Manual to identify the correct location of the jack for raising the vehicle. Jack up the vehicle, and secure it on a pair of jack stands, again referring to the Owner’s Manual for jack location joints. Note: All photographs show a left-hand side installation, unless otherwise noted. Note: All photographs show a left-hand side installation, unless otherwise noted. Note: All photographs show a left-hand side installation, unless otherwise noted. Note: All photographs show a left-hand side installation, unless otherwise noted. Note: All photographs show a left-hand side installation, unless otherwise noted. After securing the vehicle at a convenient height, remove the front wheels. Note: To ensure safety, the parking brake Note: To ensure safety, the parking brake Note: To ensure safety, the parking brake Note: To ensure safety, the parking brake Note: To ensure safety, the parking brake must be applied before removing the front must be applied before removing the front must be applied before removing the front must be applied before removing the front must be applied before removing the front wheels.… Read More

2003 Hyundai Tiburon Front Big Brake Kit Manual Installation Instructions

Filed Under (Hyundai) by admin on 21-11-2013

Download
Hyundai Tiburon Front Axle Kit. Kit Contents Your StopTech Big Brake kit includes the following: 1 pair of ST-40 four-piston calipers, sized specifically for your vehicle 1 set of high-performance street pads (not suitable for track use) 1 pair of 328 X 28mm two-piece rotor assemblies 1 pair of aluminum caliper adapter brackets 2 pair of 7/16-20 self-locking Jet nuts 2 pair of 12mm washers 1 pair of stainless steel brake lines 1 pair of banjo bolts 2 pair of copper crush washer s 1 pair of rubber end caps.
Step 1 Raise Vehicle, and Remove Wheels : A level, stable and clean surface, suitable for supporting the vehicle on jack-stands, should be used for the installation. For a front kit installation, apply the parking brake, then break loose the lug nuts on both front wheels before jacking up the car. Refer to the Owner’s Manual to identify the correct location of the jack for raising the vehicle.… Read More

ALL INFINITI BRAKE NOISE/JUDDER/PEDAL FEEL DIAGNOSIS AND REPAIR

Filed Under (Infiniti) by admin on 08-02-2014

Download • Most brake issues fall into the following categories: a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released. b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel, or brake pedal when the brakes are applied. c. Pedal Feel: The effort needed to operate the brakes is too high or too low. SERVICE PROCEDURE 1. Verify the condition by road testing the vehicle with the customer. 2. Determine the specific brake issue based on the description in the Service Information above. 3. Follow the appropriate repair procedure(s), listed on the following pages, for your specific issue. BRAKE NOISE • Brakes can make a range of noises when applied or released. Some noises are normal and no repair action should be taken. • Use the following descriptions to identify the specific type of brake noise and the appropriate repair: Squeak noise when the brakes are cold: • Usually occurs during the first few stops in the morning.… Read More

2000-2004 Audi TT Coupe Brake System

Filed Under (Audi) by admin on 31-12-2013

Download Audi TT Coupe 2000-2004, Audi TT Roadster 2001-2004 – Brake System. ABS/ESP ITT Mark 20 system components, removing and installing Brake light switch (square housing) , removing and installing Note: To ensure a secure fit, the switch may only be installed once. Removing – Remove storage compartment on driver’s side. Repair Manual, Body Interior, Repair Group 68; Storage compartments, covers – Unplug electrical connector. – Remove brake light switch -1- by turning counter-clockwise through 90. Installing Install in reverse sequence; note the following points: – Pull brake light switch plunger fully out. – Press brake pedal down as far as possible by hand. – Guide switch through installation hole and secure by turning 90 clockwise -arrows-. – Release brake pedal. – Make sure proper function of brake lights when brake pedal is pressed and released. Brake light switch (round housing) , removing and installing Note: To ensure a secure fit, the switch may only be installed once.… Read More

2004 Buick LeSabre Shake/Vibration in Steering Wheel

Filed Under (Buick) by admin on 31-12-2013

Download 2004 Buick LeSabre | LeSabre (VIN H) Service Manual. Shake/Vibration in Steering Wheel, Floor, Seat at Highway Speeds on Smooth Roads (Diagnose/Balance Tires/Wheels) Models: 1998-2005 Buick Park Avenue, Park Avenue Ultra 2000-2005 Buick LeSabre 1998-2004 Cadillac Seville (SLS, STS) 2000-2005 Cadillac DeVille (DTS only) 2001-2003 Oldsmobile Aurora 2000-2005 Pontiac Bonneville (17″ Tires only) Condition Some customers may comment on shaking/vibration in the steering wheel, floor or seat while driving at highway speeds (typically between 60-72 mph (96-115 km/h)) on smooth roads. Cause These specific vehicles may be sensitive to various rotating mass assemblies, especially if they are considered to be out-of-balance. Correction 1. Visually inspect the tires and the wheels. Inspect for evidence of the following conditions and correct as necessary: 2. Set the tire pressure to 30 psi (205 kPa) COLD. Subject: Shake/Vibration in Steering Wheel, Floor, Seat at Highway Speeds on Smooth Roads (Diagnose/Balance Tires/Wheels) Models: 1998-2005 Buick Park Avenue, Park Avenue Ultra 2000-2005 Buick LeSabre 1998-2004 Cadillac Seville (SLS, STS) 2000-2005 Cadillac DeVille (DTS only) 2001-2003 Oldsmobile Aurora 2000-2005 Pontiac Bonneville (17″ Tires only) • Missing balance weights 3.… Read More

1994-2001 Acura Integra Edelbrock Intercooler Kits Installation Instructions

Filed Under (Acura) by admin on 10-12-2013

Download
DESCRIPTION: These high-efficiency intercoolers feature a bar and plate core with cast aluminum end tanks. Intercooler #15009 is designed for 1996-2000 Honda Civics, while #15036 is for 1992-1995 Honda Civics, and #15037 is designed for 1994-2001 Acura Integras. Modification of the stock bumper cover is required, aftermarket bumper covers may or may not need modification. Intercooler #15009 features a 22″long, 6″wide, 2.5″ thick core, while #15036 &15037 feature a 22″long, 5.5″wide, and 2.5″thick core. Hose connections for all intercoolers are 2.5″diameter.
INSTALLATION PROCEDURE
1. Installation of the intercooler requires removal of the front bumper cover. Follow your factory service manual for removal and reinstallation of the bumper cover. 2. For 1996-2000 Civic, remove the bolt holding the horn onto the center radiator support and move the horn to the side. On 1992- 1995 Civic and 1994-2001 Integra, the horn may need to be moved from it’s stock location. If necessary, drill and mount the horn using hardware of your choosing.… Read More

You might also likeclose