02 oldsmobile silhouette van code p0171 and p0172

You search Auto repair manual PDF about 02 oldsmobile silhouette van code p0171 and p0172, search results will appear below. If search results do not exist, please search by others keyword.

Information on Error Codes on Radio Display – Their Cause and Corrective Action

Filed Under (Other Manuals) by admin on 25-12-2013

Download odels: 1995-1996 Buick Roadmaster 1995-1999 Buick LeSabre 1995-2004 Buick Century, Regal 1995-2005 Buick Park Avenue 1996-1999 Buick Riviera, Skylark 2004-2005 Buick Rainier 1995-1999 Chevrolet Lumina, Monte Carlo, Fullsize Pickup Models (Old Style) 1995-2005 Chevrolet Blazer 1996 Chevrolet Lumina APV 1996-1999 Chevrolet Cavalier 1996-2000 Chevrolet Express Van 1996-2002 Chevrolet Astro Van 1997-2002 Chevrolet Camaro 1997-2003 Chevrolet Malibu 1997-2005 Chevrolet Corvette, Venture 2000-2005 Chevrolet Silverado 2002-2005 Chevrolet Avalanche, TrailBlazer, TrailBlazer EXT 2003-2005 Chevrolet SSR 2004-2005 Chevrolet Classic, Colorado 1995-1999 GMC Fullsize Pickup Models (Old Style) 1995-2002 GMC Jimmy 1996-2000 GMC Savana Van 1996-2002 GMC Safari Van 2000-2005 GMC Sierra 2002-2005 GMC Envoy, Envoy XL 2004-2005 GMC Canyon, Envoy XUV 1995-1999 Oldsmobile Aurora, Eighty Eight 1995-1997 Oldsmobile Cutlass Supreme 1999-2004 Oldsmobile Alero 1998-2002 Oldsmobile Intrigue 1995-1996 Oldsmobile Ninety Eight 1996-1999 Oldsmobile Achieva 1996-2004 Oldsmobile Bravada, Silhouette 1995-1999 Pontiac Bonneville, Sunfire 1995-2002 Pontiac Firebird 1995-2005 Pontiac Grand Prix 1996-1997 Pontiac Trans Sport 1996-2000 Pontiac Grand Am 1997-2005 Pontiac Montana 2003-2005 HUMMER H2.… Read More

1995 Oldsmobile Cutlass Supreme DTC 77

Filed Under (Oldsmobile) by admin on 01-01-2014

Download Direct-Hit 1995 Oldsmobile Cutlass Supreme 3.1L Test Details Hotline Archive # 97688 Confirmed Fix Vehicle Application: 1993 Chevrolet Camaro 3.4L 1995 Chevrolet Camaro 3.4L, Vin S 1994 Buick Skylark Custom 3.1L, Vin M, Eng Cfg V6 1995 Chevrolet Lumina 3.1L 1994 Chevrolet Corsica 3.1L, Vin M, Eng Cfg V6 1995 Pontiac Grand AM SE 3.1L, Vin M, Eng Cfg V6 1994 Oldsmobile Cutlass Supreme S 3.1L, Vin M 1995 Pontiac Grand Prix SE 3.1L Customer Concern: DTC 77. Tests/Procedures: 1. Remove the throttle body, and inspect the Exhaust Gas Recirculation Valve (EGR) port in the intake plenum. 2. The passage plugs at the bottom where it dumps into the plenum. 3. Best to use an old speedometer cable in a drill to run inside the passage to knock all the carbon out. Potential Causes: Restricted Exhaust Gas Recirculation (EGR) Passages Tech Tips: When an EGR solenoid is activated by the Powertrain Control Module (PCM), the PCM monitors the change in the Manifold Absolute Pressure (MAP) reading.… Read More

Vehicles Equipped with a Webasto Sunroof System

Filed Under (Other Manuals) by admin on 16-03-2014

Download Models: 1997-2000 Buick Century 1988-1991 Buick Reatta 1988-1999 Buick Riviera 1989-2000 Buick Park Avenue 1998-2000 Buick Regal 1988-1997 Cadillac Seville 1988-1996 Cadillac Fleetwood 1988-2000 Cadillac Eldorado 1989-2000 Cadillac DeVille 1995-2000 Chevrolet Cavalier 1998-2000 Chevrolet Malibu 2000 Chevrolet Impala, Monte Carlo 1988-1995 Oldsmobile Ciera 1989-1996 Oldsmobile Ninety Eight 1994-1998 Oldsmobile Achieva 1995-1999 Oldsmobile Aurora 1997 Oldsmobile Silhouette 1998-1999 Oldsmobile Cutlass 1998-2000 Oldsmobile Intrigue 1999-2000 Oldsmobile Alero 1987 Pontiac 6000 1989-1998 Pontiac Bonneville 1994-2000 Pontiac Grand Am 1995-2000 Pontiac Sunfire 1997-1998 Pontiac Trans Sport 1997-2000 Pontiac Grand Prix 1997-2000 Chevrolet & GMC S/T Models (Blazer, Jimmy) 1997-2000 Oldsmobile Bravada.… Read More

1997 Buick Century COLD ENGINE TICK OR RATTLE AFTER START-UP

Filed Under (Buick) by admin on 05-04-2014

Download 1997 Buick Century Limited 3.1/3.4L ENG TICK OR RATTLE AFTER COLD START UP COLD ENGINE TICK OR RATTLE AFTER START-UP (REPLACE PISTON/PIN ASSEMBLY) Model(s): 1994-95 Buick Regal 1994-97 Buick Skylark 1994-98 Buick Century 1994-95 Chevrolet Beretta Corsica, Lumina, Monte Carlo 1996-98 Chevrolet Venture 1997-98 Chevrolet Malibu 1993-97 Oldsmobile Cutlass Supreme 1994-96 Oldsmobile Cutlass Ciera 1994-97 Oldsmobile Achieva 1996-98 Oldsmobile Silhouette 1997-98 Oldsmobile Cutlass 1994-98 Pontiac Grand Am, Grand Prix 1996-98 Pontiac Trans Sport with 3100, 3400 V6 Engine (VINs M, E – RPOs L82, LA1) CONDITION Some customers may comment on a ticking type noise that begins shortly after cold engine start-up and gradually diminishes as the engine warms up. In most cases, the noise is gone after five (5) minutes. In severe cases, the noise may not disappear when lhe engine is hot. CAUSE Under normal design tolerances when the piston pin bore is produced at the maximum tolerance and the piston pin is produced at the minimum tolerance (min-max tolerance) trace noise levels can occur.… Read More

2000 Honda Accord EX Coupe Repair Instructions

Filed Under (Other Manuals) by admin on 27-02-2014

Download Applies To: 1998-00 Accord L4 – See VEHICLES AFFECTED MIL Comes On With DTCs P0171 and/or P0172 (Supersedes 00-018, dated March 14, 2000) SYMPTOM The MIL (Malfunction Indicator Lamp) comes on with DTCs P0171 (Fuel System Too Lean) and/or P0172 (Fuel System Too Rich) stored in the ECM/PCM . PROBABLE CAUSE Moisture in the fuel pressure regulator. VEHICLES AFFECTED 1998-99 2-door: ALL 1998-99 4-door: ALL 2000 2-door:From VIN 1HGCG3. . .YA000001 thru YA000919 2000 4-door:From VIN 1HGCG6. . .YA000001 thru YA002332 From VIN 1HGCG5. . .YA000001 thru YA012613 From VIN JHMCG5. . .YC000001 thru YC000015 VIN JHMCG6. . .YC000001 CORRECTIVE ACTION Replace the fuel pressure regulator, and reroute the fuel pressure regulator vacuum line. PARTS INFORMATION Fuel Pressure Regulator (All):P/N 16740-PAA-A01, H/C 5429048 Fuel Pressure Regulator Tube Kit A (M/T with cruise control):P/N 06168-PAA-A10, H/C 6383186 Fuel Pressure Regulator Tube Kit B (A/T with cruise control):P/N 06168-PAA-A60, H/C 6383160 Fuel Pressure Regulator Tube Kit C (M/T without cruise control):P/N 06168-PAB- A00, H/C 6383194 Fuel Pressure Regulator Tube Kit D (A/T without cruise control):P/N 06168-PAB- A50, H/C 6383178 REPAIR PROCEDURE 1.… Read More

1996 Ford Truck E 350 Van Exhaust Manifold – Exhaust Leaks

Filed Under (Ford) by admin on 22-03-2014

Download 1996 Ford Truck E 350 Van V8-460 7.5L Exhaust Manifold – Exhaust Leaks. EXHAUST – EXHAUST LEAK AT EXHAUST MANIFOLDS – VEHICLES EQUIPPED WITH 7.0L OR 7.5L ENGINE LIGHT TRUCK: 1993-96 E-35O 1993-97 F SUPER DUTY, F-250 HD, F-350 MEDIUM/HEAVY TRUCK: 1992-97 F-700, F-800 This TSB article is being republished in its entirety to correct the Labor Operation Times listed. ISSUE An exhaust leak at the exhaust manifolds may be evident on some vehicles. This may be due to heat causing a reduction in bolt torque on the exhaust manifolds. ACTION Install new exhaust manifold bolts. Refer to the following Service Procedure and Part Application Chart for details. SERVICE PROCEDURE NOTE IF THE MANIFOLD IS TO BE RESURFACED, THE BOLTS MUST BE SHORTENED TO ACCOMMODATE THE EXHAUST MANIFOLD . THE BOLTS SHOULD HAVE THE LEADING “DOG POINT” REMOVED TO PREVENT BOTTOMING INTO THE HOLE. NOTE THERE SHOULD NOT BE ANY TYPE OF GASKET USED BETWEEN THE EXHAUST MANIFOLD AND THE CYLINDER HEAD.… Read More

2001 Oldsmobile Alero V6-3.4L VIN E Service and Repair

Filed Under (Oldsmobile) by admin on 01-01-2014

Download 2001 Oldsmobile Alero V6-3.4L VIN E Service and RepairThe fluid level screw is intended to be used for diagnosing a transaxle fluid leak or resetting the transaxle fluid level after service that involves a loss of fluid. Inspect The fluid level should be checked when the transaxle is near Room temperature or at 40°C (104°F) . CAUTION: Removal of the fluid level screw when the transaxle fluid is hot may cause injury. Use care to avoid contact of transaxle fluid to exhaust pipe. The engine must be running when the transaxle fluid level screw is removed, or excessive fluid loss will occur. Since the actual fluid level is unknown, stand clear when removing the fluid level screw. Have a container ready to capture any lost fluid. WARNING: Do not turn the engine off with the fluid level screw removed as you can be injured by hot transaxle fluid being expelled out of the fluid check hole.… Read More

1999-2000 Ford Windstar The battery light is on, but the alternator is charging Has a code P1246

Filed Under (Ford) by admin on 18-01-2014

Download Direct-Hit 2000 Ford Windstar 3.8L Test Details Hotline Archive # 124501 Confirmed Fix Vehicle Application: 1999 Ford Windstar 3.8L, Vin 4 2003 Ford Windstar 3.8L 2000 Ford Windstar 3.8L, Vin 4 Customer Concern: The battery light is on, but the alternator is charging. Has a code P1246. Tests/Procedures: 1. Disconnect the alternator and the Powertrain Control Module (PCM). Check the Violet (VT) (GENerator MONitor or GENMON) wire from the alternator to pin 20 of the PCM connector and the Red/Pink (RD/PK) (GENerator COMmand or GENCOM) wire from the alternator to pin 45 of the PCM for high resistance, an open, or a short to ground. Repair the wiring as needed. 2. If the wiring checks OK, reconnect the PCM and alternator. Start the engine and monitor the VT wire for a roughly 0-10v square wave signal. The signal will be around 40-50% normally with no loads on the system and minimal charging system output.… Read More

2003 Cadillac Escalade Code C0660 will reset.

Filed Under (Cadillac) by admin on 20-12-2013

Download Vehicle Application: 2003 Cadillac Escalade 5.3L, Vin T, USA/Canada 2005 Chevrolet Suburban 1500 LS 5.3L, GAS, Vin T 2003 Cadillac Escalade EXT 6.0L 2005 GMC Yukon XL 1500 Slt 5.3L, FLEX, Vin Z 2005 Chevrolet Suburban 1500 LS 5.3L, FLEX, Vin Z Customer Concern: Code C0660 will reset. Tests/Procedures: 1. Check the RTD fuse located in the underhood fuse block. 2. Check for Battery Voltage (B+) on the Orange wire at the automatic level control air compressor pin F. 3. If less than B+ at pin F, check for a wiring and connection problem between the air compressor and the underhood fuse block. 4. Disconnect the compressor leveling module connector and check the resistance from the positive battery voltage circuit of the exhaust solenoid valve and the control circuit of the exhaust solenoid valve. Should be 30-90 ohms. 5. Check for B+ on the Dark Blue wire pin B at the air compressor with the exhaust solenoid commanded off.… Read More

Van Step Installation Instructions

Filed Under (Ford) by admin on 21-03-2014

Download Mounting Bracket Installation 1.* Locate and drill four 5/16″ diameter holes in the step well for the upper mouting bolts. See Figures 1 and 2. NOTE: Carefully measure the 1″ and 1 1/2″ dimensions down from the steel floor surface. Do not measure from the floor covering or any kind of trim. * 2.*Bolt the top of both mounting brackets in place using the 5/16-18 hex head bolts and the wing nuts that are included in alignment jig. Refer to Figure 2. NOTE: Do not use the 5/16-18 nylock type nuts until the final mounting procedures. * 3.*Bolt the alignment jig to the studs in the mouting brackets using the wing * nuts supplied with the alignment jig. Tighten all wing nuts. NOTE: the alignment jig is not necessary for the installation of the step, however, Kwikee cannot guarantee proper alignment of the mounting brackets without it. * 4.*On 1-ton vans, mark the positions of the holes in the back end of both mounting brackets with the tail piece *in the down position as shown in Figure 2.… Read More

You might also likeclose