2002 PEUGEOT 406 SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS

0

Filed Under (Peugeot) by admin on 02-01-2014

Download
ALARM/SIREN POSITION Position the compact alarms and the sirens on the dome of the shock absorber, passenger’s side. CENTRAL UNIT POSITION Position the modular systems and the modules under the dashboard, driver’s side. POWER SUPPLY + 30: connect to the 3 mm2 RED wire located at the entrance of the fuse box. – 31: connect to one of the original ground terminals located on the right of the BSI operating central.. IGNITION WIRE + 15/54: connect to the wire at the position nr. 16 coming out of the 26 way blue connector of the BSI operating central. DIRECTION INDICATORS Connect to the wires at the positions nr. 13 and nr. 14 of the 16 way black connector coming out of the BSI operating central. ELECTRIC WINDOWS Positive control signal Front window, driver’s side: Refer to the diagram nr. 114. Front window, passenger’s side: Cut the 1 mm2 GREY wire located at the position nr. 10. Rear window, driver’s side: Cut the 1 mm2 VIOLET wire located at the position nr. 7. Rear window, passenger’s side: Cut the 1 mm2 GREY wire located at the position nr. 6. These connections are made directly in the 16 way black connector coming out of the push-button panel in the armrest of the driver’s side door. CENTRAL DOORS LOCKINGDoor original motor direct signal For the Bridge serie antithefts refer to the diagram nr. 100 ; for the 3100 serie antithefts refer to the diagram nr. 100A. IMMOBILISATION POINT Fuel pump Cut the WHITE wire located behind the left lateral bulkhead, driver’s side. STARTER + 50: Cut the BLUE wire located in the wiring harness coming out of the 3 way connector, on the left of the steering column. BONNET SWITCH Install an additional switch on the front headlamp support plate, driver’s side. DOORS SWITCH Connect to the wire, at the position nr. 14 coming out of the 26 way blue connector of the BSI operating central. Note: The lamp polarity is positive.

Incoming search terms:

2002 ford excursion starter relay location , problemer bsi peugeot 406 electric windows , peugeot bsi e02 fuse location , peugeot 406 wiring alarm , peugeot 406 open circuit battery too low harness too resistant , peugeot 406 how to connect BSI externally , peugeot 406 bsi unit , heater wiring diagram peugeot 406 hdi , free diagram electique for pegeot 406 2002 , dump de bsi , will xsara bsi fit a berlingo

Comments are closed.

You might also likeclose